Page 1 of 1
Is this a bug? 07/02/2017 at 22:01 #92986 | |
Trainfan344
![]() 262 posts |
Noticed on Birmingham New Street, that I can set a route from both intermediate signals on Platform 8 and both will display a yelllow aspect. Is this normal at New Street due to the lack of interlocking or is it a bug within the sim? Have attached a screenshot of the issue.![]() Post has attachments. Log in to view them. Log in to reply |
Is this a bug? 08/02/2017 at 00:28 #92991 | |
GeoffM
![]() 6344 posts ![]() |
On the face of it it would appear so. However the control tables don't mention opposing signals like most control tables do - even if the interlocking implicitly prohibits it by design. It's an old Westpac Mk1 so either: 1. Nobody cared back then 2. It's implicit in the interlocking's wiring. Without further information I'd lean towards #2 solely because you could potentially have two trains outside the station, both with green aspects which would end up being followed by a red at the mid-platform signal as the opposing train entered the platform. SimSig Boss Log in to reply |
Is this a bug? 08/02/2017 at 01:12 #92993 | |
DaveHarries
![]() 1280 posts |
Hadn't realised that you could set routes in opposing directions like that. Just tried it and found that it works on Platforms 1 to 9. Dave Log in to reply |
Is this a bug? 08/02/2017 at 08:03 #92994 | |
Chromatix
![]() 190 posts |
Green followed by Red is an invalid aspect sequence for colour-light areas. I would be extremely surprised if any derogation was made, especially in such a critical location. More seriously, what if one of the opposing trains continues through the mid-platform yellow while the other has only just passed the outer green? The latter train has then effectively received a Green aspect into an occupied track! This has got to be a bug. Log in to reply |
Is this a bug? 08/02/2017 at 08:27 #92996 | |
Dick
![]() 387 posts |
DaveHarries in post 92993 said:Hadn't realised that you could set routes in opposing directions like that. Just tried it and found that it works on Platforms 1 to 9.1-4 and 6-9 but not 5, which operates as you would expect. Last edited: 08/02/2017 at 08:28 by Dick Reason: punctuation Log in to reply |
Is this a bug? 08/02/2017 at 09:07 #92997 | |
headshot119
![]() 4869 posts |
GeoffM in post 92991 said:On the face of it it would appear so. However the control tables don't mention opposing signals like most control tables do - even if the interlocking implicitly prohibits it by design.Does the subroute locking not prevent two routes being set in from opposing ends while the mid platform signals are both off? "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply The following user said thank you: Tempest Malice |
Is this a bug? 08/02/2017 at 12:25 #92999 | |
Dick
![]() 387 posts |
Indeed it does.
Log in to reply |
Is this a bug? 08/02/2017 at 15:40 #93003 | |
Steamer
![]() 3958 posts |
I'm struggling to think of a scenario where the aspects as displayed could cause a problem- no route can be set into either end of the platform because the direction locking prevents it. Of more concern is that, with both sections of the platform occupied, a call-on route can be set from both signals simultaneously, and both signals clear, so theoretically two trains could shunt into the other part of the platform at the same time. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Last edited: 08/02/2017 at 15:40 by Steamer Reason: . Log in to reply |
Is this a bug? 08/02/2017 at 16:05 #93005 | |
Chromatix
![]() 190 posts |
What happens if you set routes into the platform, *then* clear the mid-platform signals?
Log in to reply |
Is this a bug? 08/02/2017 at 16:13 #93006 | |
Dick
![]() 387 posts |
You can't
Log in to reply |
Is this a bug? 08/02/2017 at 16:24 #93007 | |
Chromatix
![]() 190 posts |
That's reasonable, then - though still a little strange.
Log in to reply |
Is this a bug? 08/02/2017 at 16:41 #93009 | |
GeoffM
![]() 6344 posts ![]() |
Chromatix in post 92994 said:Green followed by Red is an invalid aspect sequence for colour-light areas. I would be extremely surprised if any derogation was made, especially in such a critical location.As others have pointed out, my scenario is not in fact possible. The worst case scenario is two calling-on aspects towards each other, which - in terms of aspect displayed to the driver - is allowed even in this day and age (opposing locking omitted). It's curious why it's not specifically listed in the control tables when other control tables of the same era - but different interlocking types - specifically do list it even though in those cases the interlocking inherently prevents it anyway. It'll get fixed. SimSig Boss Log in to reply |