Page 1 of 3
Motherwell Groundhog day (15-10-09) Timetable 14/05/2018 at 15:52 #107940 | |
Noisynoel
![]() 989 posts |
An updated version of the Motherwell groundhog day timetable is available in the Downloads area under timetables/motherwell. This has been extensively tested but there may still be some issues slipping through the cracks so please report them in this thread. Enjoy Noel Noisynoel Log in to reply The following users said thank you: HST125Scorton, Hap, BarryM |
Motherwell Groundhog day (15-10-09) Timetable 14/05/2018 at 20:04 #107947 | |
Hap
![]() 1016 posts |
Cheeerrs!!!!! ![]() How to report an issue: www.SimSig.co.uk/Wiki/Show?page=usertrack:reportanissue Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 28/05/2018 at 11:51 #108306 | |
Andrew G
![]() 550 posts |
OH26 (L73202) and 6H26 (L73202) don't work. OH26 has a final timing point of Mossend (DR2) so stops on DR2 waiting to join 6H26. 6H26 has a rule which states that it must appear 20 minutes after 0H26 leaves the area. 0H26 doesn't leave the area so 6H26 never enters. When 6H26 does enter it is expecting to find 0H26 waiting to join it - so this needs to be taken account of when correcting WTT. Last edited: 28/05/2018 at 12:36 by Andrew G Reason: Additional line added once 6H26 entered. Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 28/05/2018 at 14:46 #108311 | |
Andrew G
![]() 550 posts |
Another issue I have encountered several times, which require manual intervention, are reversals of long trains at MB298. Even with MB329 Off before the movement starts they are not proceeding far enough to be in rear of MB298. I am interested to hear whether your Testers were able to deal with these movements without manual intervention. A save is attached with 8N36 waiting to shunt via MB298. Post has attachments. Log in to view them. Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 28/05/2018 at 15:04 #108312 | |
MarkC
![]() 1099 posts |
Andrew G in post 108311 said:Another issue I have encountered several times, which require manual intervention, are reversals of long trains at MB298.In these cases manual intervention will always be required as the lenght of track between signals MB298 and MB329 is not long enough to fit a train of that length and ARS would only know to set the route upto MB329 for a reversal at that location so it will therefore never set a route beyond MB329 to enable the train to get completely behind signal MB298, so manual intervention would always be required in these situations Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 28/05/2018 at 15:08 #108313 | |
Andrew G
![]() 550 posts |
MarkC in post 108312 said:Andrew G in post 108311 said:The session isn't being run with ARS enabled and there are other locations within the simulation where a long train requires to have an additional signal to trigger the timing point - Carstairs and Long Sleepers comes to mind. At the end of the day it might be a simulation rather than WTT issue - but point accepted re ARS if it was enabled.Another issue I have encountered several times, which require manual intervention, are reversals of long trains at MB298.In these cases manual intervention will always be required as the lenght of track between signals MB298 and MB329 is not long enough to fit a train of that length and ARS would only know to set the route upto MB329 for a reversal at that location so it will therefore never set a route beyond MB329 to enable the train to get completely behind signal MB298, so manual intervention would always be required in these situations Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 28/05/2018 at 15:32 #108314 | |
Noisynoel
![]() 989 posts |
Does the timetable show N for near end stop? On first test they stopped wrong, but after the additional of the near End Stop they worked fine
Noisynoel Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 28/05/2018 at 15:50 #108315 | |
MarkC
![]() 1099 posts |
I will admit that I thought it was ARS that was the cause given that in most cases this situation is normally caused by ARS, however it seems that the train does stop with the trailing end over the points. Noel The Timetable for said train Does have Near end listed and it still behaves a such. A quick test showed that if the train is to fit fully a default stopping position of far end would be required Last edited: 28/05/2018 at 16:05 by MarkC Reason: Changed text after further testing Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 29/05/2018 at 10:03 #108320 | |
postal
![]() 5216 posts ![]() |
MarkC in post 108315 said:I will admit that I thought it was ARS that was the cause given that in most cases this situation is normally caused by ARS, however it seems that the train does stop with the trailing end over the points.I think you can force it past the signal with a stopping position of FX -nnn metres if necessary. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 29/05/2018 at 19:24 #108332 | |
Stephen Fulcher
![]() 2055 posts |
Certainly works on Plymouth, normal stopping position at Mount Gould isn't clear of the points if you don't give the shunt upto Friary, so you order an NX and the train phones up for the signal if you forget rather than reversing short.
Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 29/05/2018 at 19:38 #108333 | |
Peter Bennet
![]() 5376 posts ![]() |
The adjustment factors are in the manual. Peter I identify as half man half biscuit - crumbs! Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 01/06/2018 at 23:10 #108408 | |
Soton_Speed
![]() 283 posts |
In tonight's Motherwell - Carlisle chain it was found that the Motherwell TTs are missing a train - 4S80 04:52 Walton Old Jn Yard - Mossend Down Yard (DBS Cl66 + 20 HTA, 378m) Gretna Jnc 07/25 Kirkpatrick S863 07/29 Lockerbie 07/40 TIA. In Zone 6, no one can hear you scream... Last edited: 01/06/2018 at 23:29 by Soton_Speed Reason: None given Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 04/06/2018 at 22:32 #108453 | |
HST125Scorton
![]() 1167 posts |
Missing rules on a handful of freight while running the timetable. Should these be alternatives? as they both runs but both timetables only show the one 6M49 at Mossend. 6M49 Millerhill to Carlisle N.Y. 6M49 Mossend Yard to Carlisle N.Y. Aaron (AJRO) | Timetable Writer Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 05/06/2018 at 07:02 #108455 | |
Noisynoel
![]() 989 posts |
4S80 wasn't booked to run on 15-10-09 hence it is not in the Motherwell timetable
Noisynoel Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 05/06/2018 at 07:03 #108456 | |
Noisynoel
![]() 989 posts |
Well spotted, I'll add the rule in
Noisynoel Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 30/06/2018 at 16:33 #109981 | |
HST125Scorton
![]() 1167 posts |
I'm upto 20:30 in this timetable, I'm unsure of location Mossend Path UC Location DAR?? which is used by a couple of trains at Mossend for going into Down Arrival 1. 6M22 and 6M50 Flask return services no alternative rules for them same with going out services. There are still a number of rules that don't seem to work either. Shunts to MB298 for reversal into Mossend DA1 or 2 trains with N near end applied don't work as should instead sit there with half the train on the junction I'm thinking all these reversals should be made at MB300 reverse to save any issues. Anyway final part 2030 to end of timetable will post if anything is a miss.
Aaron (AJRO) | Timetable Writer Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 30/06/2018 at 17:42 #109982 | |
HST125Scorton
![]() 1167 posts |
Noisynoel in post 108455 said:4S80 wasn't booked to run on 15-10-09 hence it is not in the Motherwell timetableRegardless if it did or didn't ran, the train should be there as a run as required and then run if it crosses in from Carlisle if chained. Or run when required if Motherwell ran solo. 4S80 04:52 Walton Old Jn Yard - Mossend Down Yard (DBS Cl66 + 20 HTA, 378m) Gretna Jnc 0725 Kirkpatrick S863 0729 Lockerbie 0741 Beattock 0753 Beattock Summit 0808H Abington 0815H Carstairs South Jn 0828 Carstairs 0828H Lanark Jn 0831H - Allowence - Pathing 2 Law Jn 0840H - Allowence - Pathing 6H Holytown Jn 0853 Mossend East Jn 0854 Mossend Down Yard 0900 ARR DA4 Aaron (AJRO) | Timetable Writer Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 30/06/2018 at 21:59 #109993 | |
Noisynoel
![]() 989 posts |
What I'm saying is it really should be removed from the Carlisle timetable as it didn't run, not put into the Motherwell timetable
Noisynoel Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 30/06/2018 at 22:03 #109994 | |
HST125Scorton
![]() 1167 posts |
Never thought of that one, I'll take back my 4S80 comment. Anyway where is Mossend UC DAR? Scratching my brains on this.. I bet its staring in my face somewhere Aaron (AJRO) | Timetable Writer Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 02/07/2018 at 09:19 #110008 | |
Hap
![]() 1016 posts |
HST125Scorton in post 109994 said:Never thought of that one, I'll take back my 4S80 comment.I stand by my original thought and say DAR is either one of the Down Arrivals. Craig How to report an issue: www.SimSig.co.uk/Wiki/Show?page=usertrack:reportanissue Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 02/07/2018 at 14:19 #110015 | |
tjtbcork
![]() 75 posts ![]() |
HST125Scorton in post 109994 said:Never thought of that one, I'll take back my 4S80 comment.It's Mossend North Junction from MB290 Up Coatbridge (UC) to MB298 Down Arrivals (DAR). Tim. Log in to reply The following user said thank you: HST125Scorton |
Motherwell Groundhog day (15-10-09) Timetable 17/09/2018 at 12:13 #112195 | |
Andrew G
![]() 550 posts |
A friend has asked if I might consider hosting a Motherwell/Carlisle chain. At the present time the 2009 WTT is the only option. Before I make local changes to the Motherwell WTT to address some of the issues raised I was wondering if an updated version was in the pipeline? Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 17/09/2018 at 12:51 #112196 | |
Noisynoel
![]() 989 posts |
Sorry, no updated one as yet as busy building & testing sims
Noisynoel Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 02/10/2018 at 21:06 #112432 | |
Andrew G
![]() 550 posts |
Either 6M31 (H73388) is too long at 398 metres for Ravenstruther HS or the HS is too short. Trains comes out of Ravenstruther and stops at Buffer Stops, and foul of points, in effect not reaching the reversing point. Log in to reply |
Motherwell Groundhog day (15-10-09) Timetable 02/10/2018 at 21:34 #112434 | |
HST125Scorton
![]() 1167 posts |
Andrew G in post 112432 said:Either 6M31 (H73388) is too long at 398 metres for Ravenstruther HS or the HS is too short.I shorten the train by 1 wagon. 378m works perfectly. Although I'm "sure" trains upto 400m fit in Ravenstruther HS. As I sure in quotations as I could be wrong.. Aaron (AJRO) | Timetable Writer Log in to reply |