Page 1 of 1
| Sheffield (ROC) SX 08 04 2015 28/03/2019 at 17:47 #116869 | |
headshot119
4869 posts |
Sheffield (ROC) 08 04 2015 This thread is for discussion of the Sheffield (ROC) SX 08 04 2015 timetable. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
| Sheffield (ROC) SX 08 04 2015 28/03/2019 at 22:52 #116889 | |
Phil-jmw
675 posts |
6M79 0053 Barrow Hill - Tunstead called up ready to depart Barrow Hill Up Sdgs North before 0M79 LD from Earles Sdgs (presumably to work 6M79) arrived.
Log in to reply |
| Sheffield (ROC) SX 08 04 2015 29/03/2019 at 16:53 #116926 | |
Meld
1111 posts |
Thanks - Got the rule wrong should be ok on next TT update in a couple of days
Passed the age to be doing 'Spoon Feeding' !!! Log in to reply The following user said thank you: Phil-jmw |
| Sheffield (ROC) SX 08 04 2015 30/03/2019 at 01:47 #116972 | |
|
Phil-jmw
675 posts |
I have 3Q28 2208 Neville Hill - Derby RTC test train passing Bolton-on-Dearne at a speed of 90mph. While there are infrastructure monitoring trains that do transit and record at this speed, looking at the point-to-point timings and comparing them with the mileages of the timing points they equate approximately to 30mph timings, therefore I believe that this train is an ultrasonic test unit (UTU) on a recording run, which are restricted to 30mph when testing, subject to any lower permissible linespeeds. UTU's in transit are limited to 75mph max, also subject to any lower permissible linespeeds. The train formation also points to it being a UTU as at that time they were generally (and sometimes still are) formed as follows:- loco+make-up vehicle/generator vehicle+test coach+DBSO. Regards, Phil. Last edited: 30/03/2019 at 03:11 by Phil-jmw Reason: None given Log in to reply |
| Sheffield (ROC) SX 08 04 2015 30/03/2019 at 08:05 #116975 | |
|
Meld
1111 posts |
Phil-jmw in post 116972 said:I have 3Q28 2208 Neville Hill - Derby RTC test train passing Bolton-on-Dearne at a speed of 90mph. While there are infrastructure monitoring trains that do transit and record at this speed, looking at the point-to-point timings and comparing them with the mileages of the timing points they equate approximately to 30mph timings, therefore I believe that this train is an ultrasonic test unit (UTU) on a recording run, which are restricted to 30mph when testing, subject to any lower permissible linespeeds. UTU's in transit are limited to 75mph max, also subject to any lower permissible linespeeds. The train formation also points to it being a UTU as at that time they were generally (and sometimes still are) formed as follows:- loco+make-up vehicle/generator vehicle+test coach+DBSO.3Qs retimed to 30mph in next TT release Passed the age to be doing 'Spoon Feeding' !!! Log in to reply The following user said thank you: Phil-jmw |
| Sheffield (ROC) SX 08 04 2015 30/03/2019 at 08:45 #116976 | |
JohnMiller
321 posts |
Unable to set route towards Brookhouse for 2P51 (Shows route not available) Saved game attached
Post has attachments. Log in to view them. Log in to reply |
| Sheffield (ROC) SX 08 04 2015 30/03/2019 at 09:42 #116977 | |
|
MarkC
1105 posts |
JohnMiller in post 116976 said:Unable to set route towards Brookhouse for 2P51 (Shows route not available) Saved game attachedYou have the route set from WH50 as a result you will be unable to route up to it, you need to cancel the route from WH50 the you can route 2P51 Log in to reply The following user said thank you: JohnMiller |
| Sheffield (ROC) SX 08 04 2015 30/03/2019 at 09:50 #116979 | |
|
Meld
1111 posts |
Was 2P57 late exiting ? 2P57 left OT and 2P51 has called the route
Passed the age to be doing 'Spoon Feeding' !!! Log in to reply The following user said thank you: JohnMiller |
| Sheffield (ROC) SX 08 04 2015 31/03/2019 at 18:34 #117054 | |
|
JohnMiller
321 posts |
I notice trains are booked 3 minutes from departing Conisbrough to arriving at Mexborough, but in today's timetable they are booked 5 minutes.
Last edited: 01/04/2019 at 01:44 by JohnMiller Reason: None given Log in to reply |
| Sheffield (ROC) SX 08 04 2015 01/04/2019 at 15:17 #117093 | |
|
John 23
176 posts |
I have 6E78 call in from signal 235 to say "wrong route, due to go to Barrow Hill Reception Sidings", even though the route is set for just that
Log in to reply |
| Sheffield (ROC) SX 08 04 2015 01/04/2019 at 15:33 #117094 | |
GeoffM
6376 posts |
JohnMiller in post 117054 said:I notice trains are booked 3 minutes from departing Conisbrough to arriving at Mexborough, but in today's timetable they are booked 5 minutes.That's how they were timed in 2015. I can't find 5 minutes in today's timetable but 4 minutes seems common. SimSig Boss Log in to reply The following user said thank you: JohnMiller |
| Sheffield (ROC) SX 08 04 2015 01/04/2019 at 15:36 #117095 | |
|
GeoffM
6376 posts |
John 23 in post 117093 said:I have 6E78 call in from signal 235 to say "wrong route, due to go to Barrow Hill Reception Sidings", even though the route is set for just that6E78 doesn't go to Barrow Hill Rec. (Nor 6E87, 6E87, or any other variation I can think of). SimSig Boss Log in to reply |
| Sheffield (ROC) SX 08 04 2015 01/04/2019 at 15:46 #117098 | |
|
MarkC
1105 posts |
John 23 in post 117093 said:I have 6E78 call in from signal 235 to say "wrong route, due to go to Barrow Hill Reception Sidings", even though the route is set for just thatIf you set the route from 235 to 1007 then to 1013 the train will accept the route into Rec 1 Have queried about route 235 to 1013 direct Mantis 0024411 Log in to reply |
| Sheffield (ROC) SX 08 04 2015 01/04/2019 at 16:54 #117099 | |
|
John 23
176 posts |
Geoff, afraid not. 6E78 calls at Barrow Hill Reception Siding 1 for a crew change 0352 - 0419.
Log in to reply |
| Sheffield (ROC) SX 08 04 2015 01/04/2019 at 18:26 #117103 | |
jc92
3685 posts 
|
not a bug, just a query. why do some trains seed at Sheffield and then other seeds enter via the H.S. and shunt to their respective platforms rather than seeding and splitting? "We don't stop camborne wednesdays" Log in to reply |
| Sheffield (ROC) SX 08 04 2015 01/04/2019 at 18:32 #117105 | |
Steamer
3984 posts |
jc92 in post 117103 said:not a bug, just a query. Those aren't seeds. Looking at Real Time Trains, there are no scheduled services to the Holding Sidings, meaning that all of those moves will be done under local instruction. While unusual, I don't see anything particularly wrong with using non-standard descriptions for those moves (and they may reflect real-life practice at Sheffield). Those that enter with a 'proper' description are ECS moves that go further than a shunt into Sheffield station. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Last edited: 01/04/2019 at 18:35 by headshot119 Reason: None given Log in to reply |
| Sheffield (ROC) SX 08 04 2015 01/04/2019 at 19:22 #117109 | |
|
Meld
1111 posts |
jc92 in post 117103 said:not a bug, just a query.Joe It could have been a lot worse - I spent 4/5 weeks on nights watching the comings and goings of the unbooked shunt moves around the station. It got to the stage where I could even tell when the meal relief was on :) I've kept inbounds into platforms 6/8 as class 5 as opposed to using the normal method of FUEL / WASH after all you would finish up with 3 FUELs and 2 WASHs plus splits of 4 car sets stacked up off platform 8 alone. 0Sxx with the platform (3P 4P 2C 1A 1B etc) is used for moves off the HS the majority of the time, depending on who was working you could get PLT3 PLT4 etc instead. Then there are SNDS (Shunt DSS Northend) S2NE/S2SE which are Shunt P2 North/South ends) SU2N and so on. Hope this clears it up a little Passed the age to be doing 'Spoon Feeding' !!! Log in to reply |
| Sheffield (ROC) SX 08 04 2015 01/04/2019 at 19:41 #117112 | |
|
GeoffM
6376 posts |
John 23 in post 117099 said:Geoff, afraid not. 6E78 calls at Barrow Hill Reception Siding 1 for a crew change 0352 - 0419.Seems I was looking at the pre-release timetable, sorry. SimSig Boss Log in to reply |
| Sheffield (ROC) SX 08 04 2015 02/04/2019 at 14:00 #117156 | |
|
John 23
176 posts |
I have 6D94 in the Canklow UGL, awaiting departure for Masborough Junct and beyond. Nothing else even remotely in the vicinity. Totally unprompted, signal 405 clears to green, necessitating pulling the route before clearing the siding exit dummy to permit 6D94 to proceed. Not right, surely? Log in to reply |
| Sheffield (ROC) SX 08 04 2015 02/04/2019 at 16:18 #117158 | |
|
GeoffM
6376 posts |
John 23 in post 117156 said:I have 6D94 in the Canklow UGL, awaiting departure for Masborough Junct and beyond. Nothing else even remotely in the vicinity.Needs line code of UGL for Masborough SS Junction. I'll ask John (MELD) to put it in, though it's an easy change you can make yourself. SimSig Boss Log in to reply The following user said thank you: John 23 |
| Sheffield (ROC) SX 08 04 2015 06/04/2019 at 12:01 #117268 | |
HST125Scorton
1191 posts |
SDSS Sheffield Holding Sidings to Sheffield via Shunt 142 to DDS, flags up SDSS has been sent onto a good line when arriving onto DSS [-50 points] in performance. This train detaches to 2 trains and a next working DSS 5L01/3L05/5Y70. I followed the timetable correctly. Aaron (AJRO) | Timetable Writer Last edited: 06/04/2019 at 12:02 by HST125Scorton Reason: None given Log in to reply |
| Sheffield (ROC) SX 08 04 2015 08/04/2019 at 16:45 #117357 | |
|
Meld
1111 posts |
HST125Scorton in post 117268 said:SDSS Sheffield Holding Sidings to Sheffield via Shunt 142 to DDS, flags up SDSS has been sent onto a good line when arriving onto DSS [-50 points] in performance. This train detaches to 2 trains and a next working DSS 5L01/3L05/5Y70.Never really noticed the scoring side of this service so to save those 50 points edit the headcode from SDSS to 5DSS - looks identical but should alleviate the points drop - have altered TT to reflect this Passed the age to be doing 'Spoon Feeding' !!! Log in to reply The following user said thank you: HST125Scorton |
| Sheffield (ROC) SX 08 04 2015 10/04/2019 at 12:14 #117443 | |
|
Jan
906 posts |
Alternatively, if you wanted to keep the headcode the same, it should be possible to either specifically designate that particular timetable as being allowed to run on Goods lines, or else provide some timetable-specific Class of Service-rules, to force that special kind of headcode to be classified as ECS.
Two million people attempt to use Birmingham's magnificent rail network every year, with just over a million of them managing to get further than Smethwick. Log in to reply |