Page 1 of 1
| Seeding Gap? 29/11/2019 at 00:54 #121986 | |
VInce
579 posts |
Hi all, On the Peterborough sim I've been trying to seed a failed train with dead loco attached on the Flyash Line and then have a loco run onto it to assist it forward. If I create the train and seed it in the normal way and in the location list I just show Peterborough Flyash line with the activities which is a join and a next train. I set the seeding gap at P73 GPL to be 40m to allow plenty of room for the assisting engine but it does not go in clear of P73 GPL no matter what figure is in the seeding gap box. If however I seed the train in the normal way and insert just a join activity at Peterborough Flyash Line and in the location list I show an actual train movement starting at Peterborough Flyash Line with locations New England North, Helpston etc.... then the assisting engine will go in clear Just for the record, after numerous test timetables I can say that this has nothing to do with the length of the train. I need to do the former method in order not to generate a length warning, but the only thing that works is the second example, which means the length of the train is incorrect. Seems odd to me but is this working as designed and does the fact that the seed is at a GPL have anything to do with it? Vince I walk around inside the questions of my day, I navigate the inner reaches of my disarray, I pass the altars where fools and thieves hold sway, I wait for night to come and lift this dread away : Jackson Browne - The Night Inside Me Last edited: 29/11/2019 at 00:57 by VInce Reason: None given Log in to reply |
| Seeding Gap? 29/11/2019 at 01:51 #121987 | |
postal
5265 posts |
VInce in post 121986 said:Hi all,Not sure I am following what you say, but how do you mean that the length of the train is incorrect? Suppose you have a train set up with a train type showing a length of 250m. You then add a joining loco (say 20m.) and send the train forward. The train type without the joined portion is still 250m. in the TT but the core code keeps book on the lengths and the F2 display will show the length as 250m. plus join or 270m. in total and will apply that length when clearing track circuits, drawing clear of points etc. Or have I totally misunderstood what you are driving at? “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
| Seeding Gap? 29/11/2019 at 02:59 #121988 | |
|
VInce
579 posts |
Yes, I'm sorry its not very clear. Attached are two test timetables. Test Timetable 1 The assisting loco gets is clear of GPL P73 There are two train types, a failed Class 45 and and assisting loco a Class 47. When they have joined, the core code correctly shows the length as 40m for the forward train but the description of the train is incorrect in that 0Z00, now consists of a Class 47 and a Class 45 but is only shown as a Class 45 (failed) To rectify the descriptions we need to introduce a third train type which is a Class 45 + Class 47 and a third train (0Z02). This is Test Timetable 2. The assisting loco arrives, and runs onto the failed loco - it doesn't get in clear of GPL P73 although its position is still the same as it was in Test Timetable 1. When the join is complete, if ARS is being used, the combined train (0Z02) sets off wrong line towards New England because is there's no signal to stop it. Hope that's a bit clearer. Vince Post has attachments. Log in to view them. I walk around inside the questions of my day, I navigate the inner reaches of my disarray, I pass the altars where fools and thieves hold sway, I wait for night to come and lift this dread away : Jackson Browne - The Night Inside Me Last edited: 29/11/2019 at 03:17 by VInce Reason: None given Log in to reply |
| Seeding Gap? 29/11/2019 at 04:15 #121989 | |
MarkC
1105 posts |
I think I understand what you are trying to do, however in this case seeding gap will not work as the train on seeding in the sim will always approach a signal or bufferstop. What you would need to do is adjust the stopping position on the flyash you would need to set stopping position to farend with an adjustment of 40 going from what you stated in your first post, that should enable it to stop 40m from the signal and in this case it may be best to seed the train at a signal before the flyash line. Log in to reply |
| Seeding Gap? 29/11/2019 at 04:51 #121990 | |
|
VInce
579 posts |
MarkC in post 121989 said:I think I understand what you are trying to do, however in this case seeding gap will not work as the train on seeding in the sim will always approach a signal or bufferstop.Thanks Mark, but that doesn't explain why it gets in clear in one instance and not in the other. Vince I walk around inside the questions of my day, I navigate the inner reaches of my disarray, I pass the altars where fools and thieves hold sway, I wait for night to come and lift this dread away : Jackson Browne - The Night Inside Me Log in to reply |
| Seeding Gap? 01/12/2019 at 23:07 #122027 | |
|
VInce
579 posts |
Hi all, I've given it a few days for an answer so can anyone explain, in the two test timetables I've attached to another message in this thread why 0Z01 gets in clear in example 1 but doesn't in example 2 when the position of the 0Z00 doesn't change. Vince I walk around inside the questions of my day, I navigate the inner reaches of my disarray, I pass the altars where fools and thieves hold sway, I wait for night to come and lift this dread away : Jackson Browne - The Night Inside Me Last edited: 01/12/2019 at 23:15 by VInce Reason: None given Log in to reply |
| Seeding Gap? 02/12/2019 at 00:57 #122028 | |
|
postal
5265 posts |
VInce in post 122027 said:Hi all,Perhaps someone with Tester access to the sim can confirm whether the position of 0Z00 is actually the same between the 2 TTs (or perhaps Clive would be willing to grant you tester access so you can check for yourself). “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
| Seeding Gap? 02/12/2019 at 01:41 #122029 | |
|
JamesN
1608 posts |
In example 1: 0Z00 seeds at 295/335 on the Flyash line in motion, then proceeds to stop at 310/335 In example 2: 0Z00 seeds at 295/335 on the Flyash line in motion, then proceeds to stop at 334/335 The joining logic is more complicated than I fully understand; but if I recall correctly, if the sim knows it needs X amount of room to join, it will leave that amount of room available. For it to know how much room it needs; it needs to know which way the timetable (not train, they are separate things in SimSig) is going. In example 1, the join activity is mid-timetable. The train knows that after joining it needs to continue in the down direction - and it can determine it needs to leave room at the northern end of the train as the timetable for 0Z01 arrives in the down direction. In example 2 it only has one location in its timetable, it can't work out which way its meant to be going next. Seeding it at signal forces the train to head in a down direction, but the timetable is in an indeterminate no-mans state. It still knows 0Z01 arrives down, but can't work out what's happening next from the info it has. Trains will always first try to move when seeded, so the seeding gap alone is a bit of a red herring, but necessary as I'll come to. The solution I'd propose is not only to provide a seeding gap - so that the train appears before the stopping point (as much is necessary as otherwise the train might miss the stopping point), but I'd also suggest a stopping point adjustment against the location. EG:- 0Z00 seed at S73 Seeding Gap 55m Peterborough Flyash Line Stopping Position "Far End Exact" with Adjustment 40 You could reduce those values as you see fit, but I'd leave a dozen metres between seeding gap and adjustment to give the train a second or two to realise it is meant to be stopping and where it is meant to be stopping. That way it won't matter which way round you do the timetable, the train will always stop in the right place. HTH EDIT to add: While a useful tidbit on timetabling and joining trains, in its raw form the above is probably a little too vague to go directly into the wiki. If 1) We can clarify the exact correct behaviour is as I described and 2) someone with a better command of the english language wants to reword it into friendly, documentation-speak then fire away Last edited: 02/12/2019 at 01:51 by JamesN Reason: None given Log in to reply The following users said thank you: postal, VInce, Steamer |
| Seeding Gap? 02/12/2019 at 18:34 #122041 | |
|
VInce
579 posts |
Hi, Thank you - I'm very grateful for this and I've learned some of the processes involved from your explanation. I did try this on one of the numerous scenarios I tested but I guess I failed to get the numbers right. But this is progress and I shall do some more experimentation based on this explanation. Thank you. Vince I walk around inside the questions of my day, I navigate the inner reaches of my disarray, I pass the altars where fools and thieves hold sway, I wait for night to come and lift this dread away : Jackson Browne - The Night Inside Me Last edited: 02/12/2019 at 18:47 by VInce Reason: None given Log in to reply |