Page 1 of 1
| Chester 2015-04-08 SX 29/06/2020 at 14:29 #128521 | |
headshot119
4869 posts |
Chester 2015-04-08 SX This thread is for discussion of the Chester 2015-04-08 SX timetable. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
| 5D02 29/06/2020 at 20:32 #128555 | |
TylerE
149 posts |
2015 TT What's the deal with 5D02? 5D04 comes in and then drops 1G00 off the back. Now 5D02 wants to join, but 1G00 is in the way (and not departing until later). Attempting to run 5D04 through the station to join on the front of 5D02 result in 5D04 just stopping on the thru line and waiting for 5D02 Last edited: 29/06/2020 at 20:34 by headshot119 Reason: None given Log in to reply |
| Chester 2015-04-08 SX 29/06/2020 at 20:40 #128556 | |
|
headshot119
4869 posts |
TylerE in post 128555 said:2015 TTLogged for attention on Mantis 30936. As an interim you can change the activity to be DF 1G00 on 5D04. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
| Chester 2015-04-08 SX 29/06/2020 at 20:46 #128557 | |
|
TylerE
149 posts |
Ok, so I think I figured out what should happen... 5D02 wants to get to the platform first. I guess in my save 5D04 was just running super early as it was already in the platform before 5D02 entered the sim.
Log in to reply |
| Chester 2015-04-08 SX 29/06/2020 at 20:49 #128558 | |
|
headshot119
4869 posts |
TylerE in post 128557 said:Ok, so I think I figured out what should happen... 5D02 wants to get to the platform first. I guess in my save 5D04 was just running super early as it was already in the platform before 5D02 entered the sim.Ah yes, even I didn't spot that! 5D02 arrives 03:27 5D04 arrive 03:29 to join to 5D02 then continues forward at 03:49 1G00 then detaches to the rear to depart 04:22 I will go and mark my own Mantis report as requiring no attention "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
| Chester 2015-04-08 SX 01/07/2020 at 05:33 #128696 | |
|
swiftaw
271 posts |
How do you get 6L65 out of the Ellesmere Port Goods Siding? It is stopped at EL 57 but I can't route it out to platform 2.
Log in to reply |
| Chester 2015-04-08 SX 01/07/2020 at 05:39 #128697 | |
GeoffM
6376 posts 
|
swiftaw in post 128696 said:How do you get 6L65 out of the Ellesmere Port Goods Siding? It is stopped at EL 57 but I can't route it out to platform 2.Do you mean EP57? It looks like you have to back set it - set EP43 to EP61, wait for it to show proceed, then set EP57 to EP43. [Edit] I've been told to RTFM as it explains it in there :whistles: SimSig Boss Last edited: 01/07/2020 at 05:45 by GeoffM Reason: None given Log in to reply The following user said thank you: swiftaw |
| Chester 2015-04-08 SX 01/07/2020 at 06:19 #128698 | |
|
swiftaw
271 posts |
GeoffM in post 128697 said:swiftaw in post 128696 said:Thanks, I see the note in the manual now.How do you get 6L65 out of the Ellesmere Port Goods Siding? It is stopped at EL 57 but I can't route it out to platform 2.Do you mean EP57? It looks like you have to back set it - set EP43 to EP61, wait for it to show proceed, then set EP57 to EP43. Log in to reply |
| Chester 2015-04-08 SX 01/07/2020 at 12:48 #128715 | |
Steamer
3984 posts |
swiftaw in post 128698 said:GeoffM in post 128697 said:In reality, the signals are semaphore discs, which generally have to be pulled counter-sequentially (i.e. you can't clear a disc signal towards a second disc that's at stop). The same is true at Helsby.swiftaw in post 128696 said:Thanks, I see the note in the manual now.How do you get 6L65 out of the Ellesmere Port Goods Siding? It is stopped at EL 57 but I can't route it out to platform 2.Do you mean EP57? It looks like you have to back set it - set EP43 to EP61, wait for it to show proceed, then set EP57 to EP43. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| Chester 2015-04-08 SX 1h88 usl to p4 is impossible path 18/12/2020 at 12:12 #134856 | |
|
Diesel Rider
62 posts |
Hi Chester 2015-04-08sx loader 5.12 latest chester sim the 1H88 at 13.48 rockliffe chester crewe is tt routed at chester south jcn to up slow for p4 which is impossible as it needs tt amending to up fast to p4. Only a small error. Great sim and enjoying it.
Log in to reply |
| Chester 2015-04-08 SX 06/02/2021 at 20:46 #137064 | |
|
Diesel Rider
62 posts |
Weird shunt moves not working 5d33 shunts east of station on trafford line and goes down through no problem then when sent to south junction on up slow line stops at sig 105. It cannot get to p2 except on uf not us. Got 2 saves before and after dt move. I suggest either north jcn shunt 404 or down slow sig 49 to p2. Problem is rockcliffe entry 1k92 for p7 goes us at south jcn conflict with 5d33 if in down slow shunt. Why no trains tt for roodee jcn to go us and not south jcn? 3s92 is unaffected if shunt 5d33 to north jcn. Also general note if train for p3 stops at 3a for divide there is rear train over points, but if routed to 3b it blocks p2 entry. Also when train leaves having divided the 3a signal 81 does not clear and gives 120 locking even though the rear at 3a is going other way. This basically stops routing into p2. Attached saves. Loader 5.13 standard Chester 2015/04/08 sx perfect condtions normal. Any help or suggestions welcome/
Post has attachments. Log in to view them. Log in to reply |
| Chester 2015-04-08 SX 07/02/2021 at 15:20 #137066 | |
|
headshot119
4869 posts |
I've raised a ticket to adjust 5D33 to reverse at Chester North Junction to allow it to get into its booked platform. Mid platforms signals timing out when a train hasn't fully passed them is prototypical, but I'm struggling to understand what you mean about trains in 3B blocking P2, unless you mean until the overlap times out? "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
| Chester 2015-04-08 SX 08/02/2021 at 10:39 #137076 | |
|
Diesel Rider
62 posts |
Sorry did not explain clearly enough. I had a train go to platform 3 and divide with front going rockliffe and back going back to crewe. Trains divides ok but the overlap never times out from 3a to 3b and a train is due in p2 before the 3a train leaves for rockliffe. Option is to delay ps train in until p3 train left for rockliffe and you pull the mid platform signal. If the dividing train is only signalled to 3a to allow ps train in then it still divides which leaves the overhanging train fouling points to p1 and no way to signal back to crewe. Just a query as well why no trains ever use the rodee jcn to go up slow to p7 or any train not going down slow unless to shunt back into the sidings on ds.
Log in to reply |
| Chester 2015-04-08 SX 05/02/2022 at 17:59 #145027 | |
Guts
604 posts |
1D12 is the oddity here. I'm playing Chester chained to North Wales Coast and North East Wales. 1D12 originates from North East Wales (& Shrewsbury which I'm not playing), as a 158, 6 car toward Chester then to Holyhead. On its return from Holyhead as 1G50 to Bham Int via Chester, it's booked into Platform 2 where it doesn't fit and the realisation that its come over with an incorrect length. On Chester and North Wales Coast, it's booked as a 2-car 158 On North East Wales and Shrewsbury it's booked as a 6-car 158 Now looking back through more of the Sims: The train originates from Welshpool as a 2-car 158, as 1G07 before joining 2J44 (4-car 158) to become a 6-car 158 and then heading to Wellington and on towards Wolverhampton. It continues through Wolverhampton to Bham International and then come back as 1D12 still as a 6-car 158 towards Wolverhampton and hence Wellington. However When 1D12 arrives at Shrewsbury, it uncouples 1G31 (which is a 4-car 158), and proceeds on towards North East Wales as a 2-car, which has been missed on North East Wales. Log in to reply |
| Chester 2015-04-08 SX 05/02/2022 at 18:03 #145028 | |
|
headshot119
4869 posts |
I believe John has already got this in hand for a future update on North East Wales / Shrewsbury. If not earlier they'll probably ship when Crewe is released.
"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply The following user said thank you: Guts |
| Chester 2015-04-08 SX 05/02/2022 at 18:38 #145029 | |
|
Guts
604 posts |
2C32 - Y60135S, does not have its next working (2C38 - Y60150) listed in the notes section I thought this was a great addition to the timetable as you didn't have to keep going to F2 to find what was plunging/TRTS Log in to reply |