Page 1 of 1
| 158 points ignore manual point setting commands 05/07/2020 at 17:25 #129087 | |
Jan
906 posts |
Under circumstances I haven't been able to figure out, 158 points at Moss Vale sometimes seem to ignore manual point setting commands, see the attached save file for an example. There's no error message in the message window, though, and e.g. setting a shunt route from MV74 via 158 points reverse also works - and if I cancel the route afterwards, manually swinging the points also works again in both directions. Post has attachments. Log in to view them. Two million people attempt to use Birmingham's magnificent rail network every year, with just over a million of them managing to get further than Smethwick. Log in to reply |
| 158 points ignore manual point setting commands 09/07/2020 at 01:08 #129337 | |
|
TylerE
149 posts |
I can confirm I've hit the same bug, so it isn't just you.
Log in to reply |
| 158 points ignore manual point setting commands 01/08/2020 at 09:04 #130258 | |
MrSuttonmann
265 posts |
Ditto, makes things slightly more complicated for trains entering from the Up Sidings.
(Formerly known as manadude2) Log in to reply |
| 158 points ignore manual point setting commands 11/08/2020 at 13:18 #130554 | |
BarryM
2158 posts |
Jan in post 129087 said:Under circumstances I haven't been able to figure out, 158 points at Moss Vale sometimes seem to ignore manual point setting commands, see the attached save file for an example.The only available way to manually reverse 158 crossover is to click on the point (158B) which is adjacent to its controlling signal (MV74). BarryM Barry, Sydney, New South Wales, Australia Log in to reply The following user said thank you: MrSuttonmann |
| 158 points ignore manual point setting commands 15/08/2020 at 19:25 #130697 | |
|
MrSuttonmann
265 posts |
BarryM in post 130554 said:Jan in post 129087 said:Thank you Barry. I feel notes like these should be in the manual (unless they already are and haven't seen it).Under circumstances I haven't been able to figure out, 158 points at Moss Vale sometimes seem to ignore manual point setting commands, see the attached save file for an example.The only available way to manually reverse 158 crossover is to click on the point (158B) which is adjacent to its controlling signal (MV74). (Formerly known as manadude2) Log in to reply |
| 158 points ignore manual point setting commands 15/08/2020 at 19:57 #130698 | |
|
Jan
906 posts |
Interesting, although if I start a fresh game, then clicking on 158A points seems to work as well, so there's still something fishy here.
Two million people attempt to use Birmingham's magnificent rail network every year, with just over a million of them managing to get further than Smethwick. Log in to reply |
| 158 points ignore manual point setting commands 15/08/2020 at 20:25 #130700 | |
GeoffM
6376 posts |
manadude2 in post 130697 said:BarryM in post 130554 said:That's because he is wrong.Jan in post 129087 said:Thank you Barry. I feel notes like these should be in the manual (unless they already are and haven't seen it).Under circumstances I haven't been able to figure out, 158 points at Moss Vale sometimes seem to ignore manual point setting commands, see the attached save file for an example.The only available way to manually reverse 158 crossover is to click on the point (158B) which is adjacent to its controlling signal (MV74). The only thing I can see that prevents the points moving reverse is the state of 155 ground frame (F). That said, the unlocking of said GF is not consistent, though that does not affect these points. SimSig Boss Log in to reply |
| 158 points ignore manual point setting commands 15/08/2020 at 21:50 #130701 | |
|
MrSuttonmann
265 posts |
GeoffM in post 130700 said:So, it's a bug? (Formerly known as manadude2) Log in to reply |
| 158 points ignore manual point setting commands 16/08/2020 at 02:32 #130705 | |
|
GeoffM
6376 posts |
manadude2 in post 130701 said:GeoffM in post 130700 said:I cannot find an issue with clicking on the points. The GF issue is separate.So, it's a bug? SimSig Boss Log in to reply |
| 158 points ignore manual point setting commands 16/08/2020 at 03:28 #130707 | |
|
BarryM
2158 posts |
GeoffM in post 130705 said:manadude2 in post 130701 said:I stand corrected. It was based on the assumption of a saved ssg file.GeoffM in post 130700 said:I cannot find an issue with clicking on the points. The GF issue is separate.So, it's a bug? Am I still incorrect? Post has attachments. Log in to view them. Barry, Sydney, New South Wales, Australia Last edited: 16/08/2020 at 03:51 by BarryM Reason: None given Log in to reply |
| 158 points ignore manual point setting commands 30/03/2021 at 17:40 #138252 | |
|
Kage
65 posts |
I'm having this issue as well. Setting a route can change the points, as well as hand cranking them, but left or right clicking on them still acts as if they're locked. Possibly related issue... After a train went into the down thru road via frame F, after resetting the frame, MV74 continued to flash, had to set a route and cancel it again. (also related? https://www.SimSig.co.uk/Forum/ThreadView/48942) Log in to reply |
| 158 points ignore manual point setting commands 30/03/2021 at 19:32 #138253 | |
jc92
3686 posts |
GeoffM in post 130705 said:manadude2 in post 130701 said:I can reliably reproduce at least part of this on a fresh game three times in a row on three fresh loads.GeoffM in post 130700 said:I cannot find an issue with clicking on the points. The GF issue is separate.So, it's a bug? Steps to reproduce: key 158A reverse to check it works as expected then release. set route MV84 - MV62, then afterwards cancel it. Attempt to key 158A reverse again and they flash, but fail to reverse as if locked. then key via 158B and observe them correctly reverse. "We don't stop camborne wednesdays" Log in to reply |
| 158 points ignore manual point setting commands 01/04/2021 at 07:48 #138264 | |
flabberdacks
636 posts |
Mantis Mantis 33415 has been logged for this, as I have run into it many many times while playing and testing current and upcoming Australian sims. It has just been very difficult to lock down the reason why. You can always get the points over by setting a route that would drive them the opposite way, then cancelling that route before the associated signal clears. They just don't respond to left and right clicking in some circumstances. Log in to reply The following user said thank you: jc92 |
| 158 points ignore manual point setting commands 28/03/2022 at 21:47 #145905 | |
|
GeoffM
6376 posts |
I think I've fixed this now, though I could not reproduce on Moss Vale with JC92's instructions even though other's could. I could reproduce it on another sim that is in development reliably and fixed it reliably on that, and logically appears to be the same issue. The issue was pre-calling points for flank locking, which then had co-acting A and B ends (or more), and it was not clearing the pre-call on the indirect co-acting ends once the direct end detected.
SimSig Boss Log in to reply The following user said thank you: flabberdacks |