Page 1 of 1
Line + Platform codes at Newbury Racecourse 28/07/2021 at 17:12 #140804 | |
Dionysusnu
![]() 576 posts ![]() |
In the modern WTT, Newbury Racecourse has received platform and line codes. It appears the layout has also changed slightly (like electrification up to Newbury), but that's outside the scope of this request. I have included a mockup of the line codes and platform numbers. ![]() I'm currently writing a 2021-07-07 timetable, so it would be quite helpful if these platform numbers were added in the sim. There is also a new location called "NEWBURY SIGNAL T2867 (NEWB867)", which is the new layout's equivalent of R830. Currently the move Newbury-T2867-Newbury can only be timetabled by going all the way to Racecourse, because there is no R830 location. The location isn't a reverse, however, because freight trains are also booked Theale-Racecourse-T2867-Newbury-Bedwyn etc. Last edited: 28/07/2021 at 17:17 by Dionysusnu Reason: None given Log in to reply |
Line + Platform codes at Newbury Racecourse 28/07/2021 at 17:35 #140807 | |
Stephen Fulcher
![]() 2055 posts |
The line codes will be to do with the addition of ARS when the Newbury area was recontrolled into the Thames Valley Signalling Centre. This is not the era simulated on the Westbury sim. Log in to reply |
Line + Platform codes at Newbury Racecourse 28/07/2021 at 18:35 #140810 | |
Dionysusnu
![]() 576 posts ![]() |
Even in the sim era, line codes would be useful. There's currently simply no way to tell if a train is booked for the loop or the mainline.
Log in to reply |
Line + Platform codes at Newbury Racecourse 28/07/2021 at 18:39 #140811 | |
jc92
![]() 3649 posts |
Stephen Fulcher in post 140807 said:The line codes will be to do with the addition of ARS when the Newbury area was recontrolled into the Thames Valley Signalling Centre.Less about line codes, more about being able to specify in the timetable which platform number the train is booked to use where a choice is available. its available at Newbury but not Newbury racecourse. "We don't stop camborne wednesdays" Log in to reply The following user said thank you: Dionysusnu |
Line + Platform codes at Newbury Racecourse 28/07/2021 at 18:45 #140813 | |
Stephen Fulcher
![]() 2055 posts |
It likely never was in reality. If a train is booked to stop there then the chances are it’ll need the platform, otherwise send it on the main. To add line codes etc where they never existed is just as unprototypical as adding in extra signals. Log in to reply |
Line + Platform codes at Newbury Racecourse 28/07/2021 at 19:01 #140814 | |
JamesN
![]() 1591 posts ![]() |
The shunts via the Racecourse in the current day timetable - whether timetabled at signal T28xx or Racecourse station itself - take place at Racecourse station. Use of that location as an analogue in the simulation would suffice without any noticeable difference to the player. Last edited: 28/07/2021 at 19:02 by JamesN Reason: None given Log in to reply |
Line + Platform codes at Newbury Racecourse 28/07/2021 at 19:50 #140817 | |
Steamer
![]() 3958 posts ![]() |
For reversals behind R830, use the location "Newbury East (Reverse)".
"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
Line + Platform codes at Newbury Racecourse 28/07/2021 at 20:29 #140818 | |
Dionysusnu
![]() 576 posts ![]() |
Stephen Fulcher in post 140813 said:It likely never was in reality. If a train is booked to stop there then the chances are it’ll need the platform, otherwise send it on the main.Luckily you've bothered to look at the sim, so you know that all 3 lines have maintained platforms. So as the signaller, knowing which one to use is pure guesswork. Some services are timetabled through the loop, even though there would be no conflict using the mainline. Last edited: 28/07/2021 at 20:33 by Dionysusnu Reason: None given Log in to reply |
Line + Platform codes at Newbury Racecourse 28/07/2021 at 20:29 #140819 | |
Dionysusnu
![]() 576 posts ![]() |
Steamer in post 140817 said:For reversals behind R830, use the location "Newbury East (Reverse)".Ah, guess I missed that. Doesn't solve the freight trains though, but I guess I can use Racecourse with a N stopping position for that, to make sure they pull clear of the mainline. Last edited: 28/07/2021 at 20:33 by Dionysusnu Reason: None given Log in to reply |
Line + Platform codes at Newbury Racecourse 28/07/2021 at 20:33 #140820 | |
Dionysusnu
![]() 576 posts ![]() |
Stephen Fulcher in post 140813 said:To add line codes etc where they never existed is just as unprototypical as adding in extra signals.On them never existing - looking at the 2010 WTT, Racecourse has traditionally always had a row for "dep-line", albeit not being filled in at the time. Last edited: 28/07/2021 at 21:32 by Dionysusnu Reason: None given Log in to reply |
Line + Platform codes at Newbury Racecourse 28/07/2021 at 21:42 #140821 | |
Hap
![]() 1016 posts |
Platform numbers on sim and TT editor for Racecourse have been added already in the next update of the sim which is going through testing. You're composing a TT that is out of era for the sim. That choice is yours of course, but it states in the sim manual the era the sim was based around. How to report an issue: www.SimSig.co.uk/Wiki/Show?page=usertrack:reportanissue Log in to reply |
Line + Platform codes at Newbury Racecourse 28/07/2021 at 21:47 #140822 | |
Stephen Fulcher
![]() 2055 posts |
Dionysusnu in post 140818 said:Stephen Fulcher in post 140813 said:I’ve looked at the sim many times, and as Peter Bennet will tell you from when he updated it to loader specifications, probably in a far more detailed manner than most users ever would.It likely never was in reality. If a train is booked to stop there then the chances are it’ll need the platform, otherwise send it on the main.Luckily you've bothered to look at the sim, so you know that all 3 lines have maintained platforms. So as the signaller, knowing which one to use is pure guesswork. Some services are timetabled through the loop, even though there would be no conflict using the mainline. Quote: On them never existing - looking at the 2010 WTT, Racecourse has traditionally always had a row for "dep-line", albeit not being filled in at the time.The fact that it wasn’t filled in should tell you all you need to know - that it wasn’t used. It seems to me that you’re wanting to play a game rather than simulate railway operations, part of the challenge of older non-ARS areas was for the Signallers to know their area and the timetable and work it accordingly without having to be micromanaged by timetable planners telling them what route to set and when. Log in to reply The following user said thank you: Hap |
Line + Platform codes at Newbury Racecourse 28/07/2021 at 21:49 #140823 | |
Dionysusnu
![]() 576 posts ![]() |
Hap in post 140821 said:Platform numbers on sim and TT editor for Racecourse have been added already in the next update of the sim which is going through testing.Thank you. That's great to hear, and all I needed to know. Last edited: 28/07/2021 at 21:51 by Dionysusnu Reason: None given Log in to reply |
Line + Platform codes at Newbury Racecourse 28/07/2021 at 22:31 #140827 | |
Peter Bennet
![]() 5376 posts ![]() |
Somebody asked for this before and I checked the Rules of the Plan which said Quote: Newbury Racecourse – Platform detail must be shown So have made them available in the next release which is awaiting approval to release as HAP noted. Peter I identify as half man half biscuit - crumbs! Log in to reply The following users said thank you: Hap, jc92, Dionysusnu, haydenrobertson, Albert |
Line + Platform codes at Newbury Racecourse 10/08/2021 at 19:50 #141065 | |
Dionysusnu
![]() 576 posts ![]() |
Steamer in post 140817 said:For reversals behind R830, use the location "Newbury East (Reverse)".This location does not have any platform/line codes either, so I can't specify whether the reversal is behind R830, R824 or R488. Log in to reply |
Line + Platform codes at Newbury Racecourse 10/08/2021 at 20:09 #141068 | |
Steamer
![]() 3958 posts ![]() |
Dionysusnu in post 141065 said:Steamer in post 140817 said:Probably accurate at the time the simulation was set, there was a TIPLOC for R830 only. Signallers can generally be expected to work that one out from context, or failing that a TT note if you're doing something very unusual.For reversals behind R830, use the location "Newbury East (Reverse)".This location does not have any platform/line codes either, so I can't specify whether the reversal is behind R830, R824 or R488. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Last edited: 10/08/2021 at 20:10 by Steamer Reason: None given Log in to reply The following user said thank you: Dionysusnu |
Line + Platform codes at Newbury Racecourse 10/08/2021 at 21:14 #141069 | |
bill_gensheet
![]() 1357 posts |
Dionysusnu in post 141065 said:Steamer in post 140817 said:As it is not an ARS sim, line codes are not used / needed.For reversals behind R830, use the location "Newbury East (Reverse)".This location does not have any platform/line codes either, so I can't specify whether the reversal is behind R830, R824 or R488. Log in to reply |
Line + Platform codes at Newbury Racecourse 12/08/2021 at 18:48 #141090 | |
Dionysusnu
![]() 576 posts ![]() |
I see it released. I couldn't find a changelog. Is this the only addition in the update?
Log in to reply |
Line + Platform codes at Newbury Racecourse 12/08/2021 at 18:59 #141091 | |
Peter Bennet
![]() 5376 posts ![]() |
Dionysusnu in post 141090 said:I see it released. I couldn't find a changelog. Is this the only addition in the update?I'll do that shortly. Peter I identify as half man half biscuit - crumbs! Log in to reply |
Line + Platform codes at Newbury Racecourse 12/08/2021 at 20:09 #141095 | |
bill_gensheet
![]() 1357 posts |
Refreshed 'official' 2007 timetable to follow: Converted siding entries to seeds. Used crew changes in place of 2 min stops. Used new set down options if better suited Sorted a few trivial bugs. Some rules converted to decisions where a change was needed or worthwhile anyway. Bill Log in to reply |