Page 1 of 1
| Dean Hill GF 05/07/2023 at 00:32 #152288 | |
Kage
65 posts |
I've got a train waiting to enter the siding and the GF is free. I have the GF menu open, with the king lever pulled. When I pull the points lever, the lever moves, but the points do not move. I can pull the UP GPL signal lever, which turns the stem white, but doesn't clear the signal. Tried on 80's and 2000 eras. 3016 Main can also be checked, which goes yellow, but the route that goes white are the track circuits beside 5 and 7.
Log in to reply |
| Dean Hill GF 05/07/2023 at 08:54 #152289 | |
9pN1SEAp
1180 posts 
|
I'm puzzled too. Is the train actually parked right up to the GPL (3012)? I note that "Siding Shunt Signal" can be signalled even with points lever 3 normal, which seems odd. Thanks Jamie Jamie S (JAMS) Log in to reply |
| Dean Hill GF 05/07/2023 at 08:57 #152290 | |
Hap
1039 posts
|
Kage in post 152288 said:I've got a train waiting to enter the siding and the GF is free. I have the GF menu open, with the king lever pulled. When I pull the points lever, the lever moves, but the points do not move. I can pull the UP GPL signal lever, which turns the stem white, but doesn't clear the signal. Tried on 80's and 2000 eras. 3016 Main can also be checked, which goes yellow, but the route that goes white are the track circuits beside 5 and 7.From the manual Quote: Dean Hill GFI suspect the check box controls for the signals are wrong though and some slight detail in manual missing. It is possible to get all the required to pull off though, and just remember that the crossing needs to lower again too, so that will take a bit of time before the signal clears. Will look into it further soon. Cheers Craig Post has attachments. Log in to view them. How to report an issue: www.SimSig.co.uk/Wiki/Show?page=usertrack:reportanissue Last edited: 05/07/2023 at 09:14 by Hap Reason: None given Log in to reply |
| Dean Hill GF 05/07/2023 at 10:55 #152291 | |
|
9pN1SEAp
1180 posts
|
Thanks Craig. I didn't spot from the diagram there was a headshunt, I mistakenly saw that as a trap.
Jamie S (JAMS) Log in to reply |
| Dean Hill GF 05/07/2023 at 11:38 #152292 | |
|
AndyG
1842 posts |
Set the ERs on sigs 1 & 5, release the GF, pull the levers King 1, points 3, signal 2 (for 3012) and wait for the AHB to lower and clear the signal. The GF siding track is actually a RR loop/'exchange sdg', the actual depot is reached via the stub line using the siding shunt signal with the points normal. I can only help one person a day. Today's not your day. Tomorrow doesn't look too good either. Log in to reply |
| Dean Hill GF 05/07/2023 at 15:03 #152293 | |
|
Kage
65 posts |
3012 will clear, after the crossing lowers, except that while the interlocking thinks the points are reversed, they don't actually reverse, and thus the train proceeds down the Up line 
Log in to reply |
| Dean Hill GF 05/07/2023 at 15:22 #152294 | |
|
Hap
1039 posts
|
This is prototypical. The train does go into the sidings. You'll see that the Track circuits will eventually clear out on the Up.
How to report an issue: www.SimSig.co.uk/Wiki/Show?page=usertrack:reportanissue Last edited: 05/07/2023 at 15:22 by Hap Reason: None given Log in to reply |