Page 1 of 2
| New! Tyneside ROC - December 16th 2024 10/12/2024 at 10:25 #159390 | |
chrisdmadd
256 posts |
Soon to be released! I've been creating a December 2024 timetable over the last month or so and I'm just putting the finishing touches to it now. This will feature newly timetabled Northumberland Line services and some new York shuttles from LNER. A full freight timetable is running, making for a busy timetable. Hopefully released on Monday the 16th December. Log in to reply The following users said thank you: Splodge, HST125Scorton, fcooper94, casey jones, Banners88, Guts, RailwayFan8, phil1044, ozrail, slatteryc |
| New! Tyneside ROC - December 16th 2024 10/12/2024 at 16:11 #159394 | |
|
casey jones
73 posts |
Cheers Chris really looking forward to this one being a Sunderland lad living down south cheers mick Log in to reply The following user said thank you: chrisdmadd |
| New! Tyneside ROC - December 16th 2024 16/12/2024 at 22:20 #159525 | |
|
chrisdmadd
256 posts |
Two versions now released and approved. Please let me know of any issues here and I will get future versions updated. Go gentle! Log in to reply |
| New! Tyneside ROC - December 16th 2024 16/12/2024 at 23:03 #159526 | |
|
chrisdmadd
256 posts |
A few things I've annoyingly noticed since the initial release! You will need to amend the dwell times on your Metro's if you downloaded V1.0 of the 03:40 TT. Version 1.2 6C86 - Thruline Darlington added. Tyne and Wear Metros had dwell time (Station forward) set to 00:01:00. This should be 00:00:00 (Default). Last edited: 16/12/2024 at 23:05 by chrisdmadd Reason: None given Log in to reply |
| New! Tyneside ROC - December 16th 2024 17/12/2024 at 09:51 #159527 | |
|
slatteryc
266 posts |
how do you get trains into Darlingon down sidings from 4b, open the GF, change the points tick the "handsignal in" but none of the sigs seem to work to signal the train forward ?
Log in to reply |
| New! Tyneside ROC - December 16th 2024 17/12/2024 at 10:02 #159528 | |
|
slatteryc
266 posts |
i can get it into the bypass to the LOS but then the GF doesnt work
Log in to reply |
| New! Tyneside ROC - December 16th 2024 17/12/2024 at 13:36 #159530 | |
|
chrisdmadd
256 posts |
slatteryc in post 159528 said:i can get it into the bypass to the LOS but then the GF doesnt workIn the instructions it does mention you may have to talk that train past a signal at Danger to get it into the sidings. I'll rewrite it with some more detailed instructions. Log in to reply The following user said thank you: slatteryc |
| New! Tyneside ROC - December 16th 2024 17/12/2024 at 14:54 #159532 | |
|
chrisdmadd
256 posts |
6U81 Instructions Once 6U81 arrives into 4B (advise to make 6U81 non-ARS). Obtain GF 1082 and set the route and the handsignal into the Down sidings. Set the points ahead of T888 and lock them reverse. Talk 6U81 past T888 at danger and into the Down Sidings.  Post has attachments. Log in to view them. Log in to reply The following user said thank you: slatteryc |
| New! Tyneside ROC - December 16th 2024 17/12/2024 at 17:56 #159535 | |
|
slatteryc
266 posts |
Great thats what I had inadvertendly did anyway !
Log in to reply |
| New! Tyneside ROC - December 16th 2024 17/12/2024 at 18:01 #159536 | |
|
slatteryc
266 posts |
next - 6C86 - it has a 2 min stop on the Up Main at Darlington ( I'm running everything manual except the metro line ) 6C86 is being chased by 3D01 at Darlington though at this point , should 6C86 not go into the loop rather than stand on the main , to be bypassed ? Log in to reply |
| New! Tyneside ROC - December 16th 2024 17/12/2024 at 19:01 #159540 | |
|
chrisdmadd
256 posts |
slatteryc in post 159536 said:next - 6C86 - it has a 2 min stop on the Up Main at Darlington ( I'm running everything manual except the metro line )The TT is as it was written by NR so I can't change that. I believe 6C86 has a timed pause at Darlington so that 1N51 gets the route into Darlington first. 3D01 divides in P4 and by that time 6C86 is well on its way. Hopefully you're enjoying the TT. Log in to reply |
| New! Tyneside ROC - December 16th 2024 17/12/2024 at 21:44 #159541 | |
|
slatteryc
266 posts |
yes all good fun - do you want to know about overhang platforms ?
Log in to reply |
| New! Tyneside ROC - December 16th 2024 17/12/2024 at 22:03 #159542 | |
|
chrisdmadd
256 posts |
Fire away.
Log in to reply |
| New! Tyneside ROC - December 16th 2024 18/12/2024 at 04:07 #159546 | |
BenWright
199 posts |
Thanks for making this, seems like a good timetable. I have noticed that 6N55 is set to 75mph instead of 60mph, not sure if it's meant to be or not
Log in to reply The following user said thank you: chrisdmadd |
| New! Tyneside ROC - December 16th 2024 18/12/2024 at 19:32 #159560 | |
|
chrisdmadd
256 posts |
BenWright in post 159546 said:Thanks for making this, seems like a good timetable. I have noticed that 6N55 is set to 75mph instead of 60mph, not sure if it's meant to be or notI know some of the stock is capable of 75mph running but they are all timed at 60mph so I think that's where I've got confused. Changed them all to 60mph now in V1.4. Log in to reply |
| New! Tyneside ROC - December 16th 2024 18/12/2024 at 21:30 #159565 | |
|
BenWright
199 posts |
Ah, thanks
Log in to reply |
| New! Tyneside ROC - December 16th 2024 19/12/2024 at 09:26 #159574 | |
|
kbarber
1764 posts |
chrisdmadd in post 159560 said:BenWright in post 159546 said:Thanks for making this, seems like a good timetable. I have noticed that 6N55 is set to 75mph instead of 60mph, not sure if it's meant to be or notI know some of the stock is capable of 75mph running but they are all timed at 60mph so I think that's where I've got confused. Changed them all to 60mph now in V1.4. In real life (back in the mid-1980s, at least) it was regarded as perfectly legitimate to reclassify a train if the vehicles on it were authorised for a higher speed. At Willesden the AYM (rather than the Yard Supervisor) would let Control know but, by and large, it would be down to the signalmen en-route to decide how to regulate it. Chances are they would take no action until it showed up early in their describer as a 4 rather than a 6 (the usual change we made), as there would be no way of telling what previous boxes would be able to do with it to take advantage of the reclassification. Log in to reply |
| New! Tyneside ROC - December 16th 2024 19/12/2024 at 10:41 #159575 | |
|
slatteryc
266 posts |
5s09 and 2t11 seem to both want to occupy P3 in Newcastle, however this leaves 2T11 overhanging the back of Newcastle East Jn
Log in to reply |
| New! Tyneside ROC - December 16th 2024 19/12/2024 at 15:48 #159586 | |
|
chrisdmadd
256 posts |
slatteryc in post 159575 said:5s09 and 2t11 seem to both want to occupy P3 in Newcastle, however this leaves 2T11 overhanging the back of Newcastle East Jn5S09 Shunts to the Forth Banks line (07:35) for around 90 minutes freeing up platform 3. 2T06 then arrives at 07:38, next working 2T11 at 07:48. Log in to reply |
| New! Tyneside ROC - December 16th 2024 19/12/2024 at 16:53 #159587 | |
|
slatteryc
266 posts |
5S09 did not TRTS from p3 for the trip to the Forth banks until a few mins after 2T06 arrived - was wondering about that myself ... cant remember exactly what the timings were. Nice timetable by the way, certainly busy enough ! .. timetabling at benton does indeed look very tight ... up to 8 .... it keeps you jumping from one end of the sim to the other ! Log in to reply |
| New! Tyneside ROC - December 16th 2024 21/12/2024 at 07:53 #159596 | |
|
BenWright
199 posts |
I noticed that some trains have custom train types even though the train type exists, for example some of the TPE 802 services have a custom, different length train despite being the same train type
Log in to reply |
| New! Tyneside ROC - December 16th 2024 21/12/2024 at 08:09 #159597 | |
|
chrisdmadd
256 posts |
BenWright in post 159596 said:I noticed that some trains have custom train types even though the train type exists, for example some of the TPE 802 services have a custom, different length train despite being the same train typeYeah that's due to the ones calling at Newcastle P11 having to be shortened due to the sim not being quite up to date. Log in to reply |
| New! Tyneside ROC - December 16th 2024 21/12/2024 at 08:21 #159598 | |
andyallen4014
379 posts |
slatteryc in post 159587 said:5S09 did not TRTS from p3 for the trip to the Forth banks until a few mins after 2T06 arrived - was wondering about that myself ... cant remember exactly what the timings were.Chris, this sounds similar to what I encountered in testing, although it did TRTS before the next train arrived there was still something odd. User | Multiplayer Host | Timetable Writer Log in to reply |
| New! Tyneside ROC - December 16th 2024 21/12/2024 at 10:59 #159600 | |
|
chrisdmadd
256 posts |
andyallen4014 in post 159598 said:slatteryc in post 159587 said:Something to do with dwell times maybe? If it arrived late….5S09 did not TRTS from p3 for the trip to the Forth banks until a few mins after 2T06 arrived - was wondering about that myself ... cant remember exactly what the timings were.Chris, this sounds similar to what I encountered in testing, although it did TRTS before the next train arrived there was still something odd. I’ve never noticed anything unusual during my testing but I’ll take another look. Log in to reply |
| New! Tyneside ROC - December 16th 2024 21/12/2024 at 19:54 #159605 | |
|
slatteryc
266 posts |
i'd have been ok with it but i looked at the set lengths and it should have worked if the 5xxx set had come in and left enough room for the 2t to come in - thats what was bugging me
Log in to reply |