CCTV LC treadles / warnings?

You are here: Home > Forum > Simulations > Released > Tyneside IECC > CCTV LC treadles / warnings?

Page 1 of 1

CCTV LC treadles / warnings? 11/02/2025 at 13:52 #160160
MrSuttonmann
Avatar
269 posts
I suppose it's true to life that the sim doesn't have any CCTV LLC treadle / warnings for approaching trains, but it's easy to miss a train on a sim this large.

Can a cheeky request for some warnings be made - even if behind a sim option? (Or even auto-lowering in Extra ARS mode?)


(Formerly known as manadude2)
Last edited: 11/02/2025 at 13:54 by MrSuttonmann
Reason: None given

Log in to reply
CCTV LC treadles / warnings? 11/02/2025 at 18:45 #160163
postal
Avatar
5323 posts
MrSuttonmann in post 160160 said:
I suppose it's true to life that the sim doesn't have any CCTV LLC treadle / warnings for approaching trains, but it's easy to miss a train on a sim this large.

Can a cheeky request for some warnings be made - even if behind a sim option? (Or even auto-lowering in Extra ARS mode?)

:)
When the IECC first opened there were frequent occasions when Hett Mill was not lowered in time leading to a train being cautioned. Just after the opening of the IECC there was a regular programme of visits from drivers in order to see and understand the scope and workings of the new Centre. There is an anecdotal tale that on one of the visits one of the drivers raised the Hett Mill issue. This led to a debate as the guide insisted that it would never happen and involved the signaller on the panel at the time in the discussion. The discussion was only resolved when the signaller had to go back to the panel take a call from a driver waiting at red at Hett Mill.

IIRC the plan was also to take Morpeth, Alnmouth and Tweedmouth into the IECC and there was enough room on the floor to install the relevant panels. It would have required three separate work stations as each of the boxes has a large number of LCs to monitor. Eventually that plan was not taken forward as it was thought at the time that the labour savings would have been minimal and it would have caused a big upheaval for the staff and HR department.

“In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe
Log in to reply
The following users said thank you: 2W34, TUT, MrSuttonmann, chrisdmadd, DonRiver
CCTV LC treadles / warnings? 12/02/2025 at 16:08 #160172
MrSuttonmann
Avatar
269 posts
What's even more annoying about that whole scenario with Hett Mill LC is that the road only goes to a farm and a house.

You'd expect it to be a main road, but it probably sees very little vehicle traffic at all.

In that case, is there much harm in un-ticking the "Auto-raise" button ;)

(Indeed I wonder why a CCTV LC was installed here at all - surely an AHB would have sufficed?)

(Formerly known as manadude2)
Last edited: 12/02/2025 at 16:32 by MrSuttonmann
Reason: None given

Log in to reply
CCTV LC treadles / warnings? 12/02/2025 at 16:37 #160173
Stephen Fulcher
Avatar
2102 posts
I do not know when this crossing was installed but there will have been a good reason.

New AHBs have been banned for a long time now and would not be a good choice if there is a lot of slow farm traffic even when they were allowed.

Log in to reply
The following user said thank you: MrSuttonmann
CCTV LC treadles / warnings? 13/02/2025 at 17:43 #160188
jc92
Avatar
3715 posts
Online
MrSuttonmann in post 160172 said:
What's even more annoying about that whole scenario with Hett Mill LC is that the road only goes to a farm and a house.

You'd expect it to be a main road, but it probably sees very little vehicle traffic at all.

In that case, is there much harm in un-ticking the "Auto-raise" button ;)

(Indeed I wonder why a CCTV LC was installed here at all - surely an AHB would have sufficed?)
What's the line speed there? AHBs are only good up to 100mph.

"We don't stop camborne wednesdays"
Log in to reply
CCTV LC treadles / warnings? 13/02/2025 at 18:28 #160189
9pN1SEAp
Avatar
1207 posts
Online
Just wondering why this is not set closed by default with a raise request button (like Heck Line near Drax B. Jn)?
Jamie S (JAMS)
Log in to reply
CCTV LC treadles / warnings? 14/02/2025 at 10:04 #160190
MrSuttonmann
Avatar
269 posts
jc92 in post 160188 said:
MrSuttonmann in post 160172 said:
What's even more annoying about that whole scenario with Hett Mill LC is that the road only goes to a farm and a house.

You'd expect it to be a main road, but it probably sees very little vehicle traffic at all.

In that case, is there much harm in un-ticking the "Auto-raise" button ;)

(Indeed I wonder why a CCTV LC was installed here at all - surely an AHB would have sufficed?)
What's the line speed there? AHBs are only good up to 100mph.
You learn something new every day! Didn't know that, thanks JC.

9pN1SEAp in post 160189 said:

Just wondering why this is not set closed by default with a raise request button (like Heck Line near Drax B. Jn)?
Another good question. The powers that be missed a trick here, especially if the crossing became a known problem for being missed. I'm no expert on LC equipment, but surely a rather simple upgrade? (I immediately regret suggesting that... I can imagine this equipment being rather bespoke for certain scenarios - probably requiring a complete replacement of at least the cabinet hardware).

Well, I've ran the sim for a good few hours now with the LC locked down. If the farmer/resident wanted to have crossed, I'm sure they would have called by now

(Formerly known as manadude2)
Log in to reply
CCTV LC treadles / warnings? 14/02/2025 at 11:45 #160191
postal
Avatar
5323 posts
If anyone wants to see the crossing there are lots of pics and youtube clips on line if you do an image search for hett mill level crossing.
“In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe
Log in to reply