Page 1 of 1
Question regarding a TC Failure at Newark Flat Crossing 08/04/2023 at 15:50 #151099 | |
bugsy
![]() 1732 posts |
In my 1991 game, I’ve just had a TC failure at the Newark Flat Crossing. IRL, or in the sim for that matter, would a signaller be allowed to talk a train past the signal at danger? After all, I can’t see any danger in doing so. However, I suspect not, but thought that I would ask anyway. I've paused the game until I get an answer Edit: Now that's interesting. I thought that I would give it a try with 1E01 and it traversed the crossing and carried on towards Newark Station. ![]() Post has attachments. Log in to view them. Everything that you make will be useful - providing it's made of chocolate. Last edited: 08/04/2023 at 15:59 by bugsy Reason: None given Log in to reply |
Question regarding a TC Failure at Newark Flat Crossing 08/04/2023 at 15:59 #151100 | |
Stephen Fulcher
![]() 2055 posts |
You would need to examine the line to determine that it was a track circuit failure and not part of a train left behind.
Log in to reply |
Question regarding a TC Failure at Newark Flat Crossing 08/04/2023 at 21:16 #151105 | |
dwaynedibley
![]() 30 posts |
Yes you can talk trains past signals at danger on the up and down main over the flat crossing. As it is a fixed crossing, with no moving point work, there are no rules that prohibit you from doing so. As Stephen Fulcher says, standard rules would apply for talking past signals at danger and there are no signal box special instructions for this situation.
Log in to reply |
Question regarding a TC Failure at Newark Flat Crossing 08/04/2023 at 22:07 #151106 | |
clive
![]() 2766 posts |
dwaynedibley in post 151105 said:Yes you can talk trains past signals at danger on the up and down main over the flat crossing. As it is a fixed crossing, with no moving point work, there are no rules that prohibit you from doing so. As Stephen Fulcher says, standard rules would apply for talking past signals at danger and there are no signal box special instructions for this situation.Presumably this rule only applies if the route is set. I must admit that I'd feel happier if both protecting signals on the other line were collared during this move. I know that TORR is supposed to be immune against a simple "bobbing" track circuit (I forget if Donny has TORR), but I'd hate to find the route releasing without warning. Log in to reply |
Question regarding a TC Failure at Newark Flat Crossing 08/04/2023 at 22:45 #151107 | |
TUT
![]() 514 posts ![]() |
clive in post 151106 said:dwaynedibley in post 151105 said:It's a fixed crossing, there's no switches to move. It's like if you're at Willesden Junction and a train is to S5 WS22 you don't have to worry about the diamond crossing where the line from Kensal Green Junction crosses the Up to join the Down.Yes you can talk trains past signals at danger on the up and down main over the flat crossing. As it is a fixed crossing, with no moving point work, there are no rules that prohibit you from doing so. As Stephen Fulcher says, standard rules would apply for talking past signals at danger and there are no signal box special instructions for this situation.Presumably this rule only applies if the route is set. Reminders on conflicting routes would absolutely be required in order to prevent you from signalling a conflicting move during your S5 but not to prevent points moving, there's nothing movable there. The Rule Book does actually specifically prohibit calling a route over a failed track circuit, although I suppose you're locked up anyway. Edit: See: https://www.flickr.com/photos/eastfield/28152793168 Last edited: 08/04/2023 at 22:47 by TUT Reason: None given Log in to reply |
Question regarding a TC Failure at Newark Flat Crossing 09/04/2023 at 10:07 #151109 | |
bill_gensheet
![]() 1357 posts |
Is the problem more that: Your examining Nottingham - Lincoln has to pass at red and so cannot have the route set over the crossing It might clear the short circuit (swarf in IBJ etc) That could allow ARS clear the ECML Then the examining train proceeds onto the TC for real and reverts the ECML Log in to reply |
Question regarding a TC Failure at Newark Flat Crossing 09/04/2023 at 11:56 #151110 | |
Stephen Fulcher
![]() 2055 posts |
Collaring the signals over the crossing from all directions would prevent ARS setting a route if the route unexpectedly released.
Log in to reply |
Question regarding a TC Failure at Newark Flat Crossing 09/04/2023 at 13:08 #151111 | |
bugsy
![]() 1732 posts |
clive in post 151106 said:dwaynedibley in post 151105 said:And this sim doesn't have ARS. If it had, I would have turned that off too and made a note of it in my book.Yes you can talk trains past signals at danger on the up and down main over the flat crossing. As it is a fixed crossing, with no moving point work, there are no rules that prohibit you from doing so. As Stephen Fulcher says, standard rules would apply for talking past signals at danger and there are no signal box special instructions for this situation.Presumably this rule only applies if the route is set. Note for Clive - Donny South does have TORR but I turn it off. Everything that you make will be useful - providing it's made of chocolate. Last edited: 09/04/2023 at 14:27 by bugsy Reason: None given Log in to reply |
Question regarding a TC Failure at Newark Flat Crossing 09/04/2023 at 14:06 #151112 | |
Mikehax
![]() 32 posts |
bugsy in post 151111 said:[quote=clive;post=151106][quote=dwaynedibley;post=151105]TORR is available in the Simsig version, but the real life panel does not have TORR. Also, being a NX panel it doesn't have ARS. Log in to reply |