Page 1 of 1
Chicago Loop - P4 Locked with movement over P3 when reversed 16/04/2017 at 18:32 #94520 | |
rfw
![]() 150 posts |
I've just found a slightly unexpected feature as a result of locking involving T102, P3 & P4 See chain of events below... Train A has previously been sent from signal X110 to X3 leaving points P1, P12, P4 & P11 in a reverse position ![]() Train B is routed from signal X110 to X108, locking points P3 & P7 in a reverse position ![]() Train B enters track section T102 & P4 becomes locked in the position they were last in (reversed) ![]() Train C needs to be routed from signal 2 to X112. When I try to do this I get the following message, telling me the "point(s) are locked reverse by another route" referring to points P4 ![]() If I route train C over the square before train B enters T102, P4 is normalised & routing of train C from signal 2 to X112 is successful, thus locking points P1, P4 & P5 normal ![]() Is i just a quirk of the locking or is there a way to change it, such P4 is not locked or locked normal when T102 is occupied and P3 is reversed? I get if it's like that in real life, then nothing can be done, but if not that would save some frustration! -RFW The train now standing on platform 2, should be on the rails Last edited: 16/04/2017 at 18:33 by rfw Reason: None given Log in to reply The following user said thank you: DaveBarraza |
Chicago Loop - P4 Locked with movement over P3 when reversed 16/04/2017 at 19:02 #94523 | |
Steamer
![]() 3958 posts ![]() |
All points in an occupied track circuit, regardless of whether they're in a route, are locked when the track circuit is occupied. It's a safety feature of the interlocking.
"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply The following user said thank you: rfw |
Chicago Loop - P4 Locked with movement over P3 when reversed 16/04/2017 at 20:22 #94526 | |
GeoffM
![]() 6344 posts |
Thanks - the second points (non-route) should indeed be called normal by the first (route) points for this very reason. Will add it to our bug board.
SimSig Boss Log in to reply The following users said thank you: rfw, DaveBarraza |
Chicago Loop - P4 Locked with movement over P3 when reversed 22/06/2021 at 14:27 #140127 | |
DaveBarraza
![]() 88 posts |
Steamer in post 94523 said:All points in an occupied track circuit, regardless of whether they're in a route, are locked when the track circuit is occupied. It's a safety feature of the interlocking.The above is true, but if locking points that could have been pre-positioned would result in a loss of flexibility (e.g. unnecessarily preventing parallel routes) then one should throw them even through the train might not actually be traversing them. Log in to reply |
Chicago Loop - P4 Locked with movement over P3 when reversed 22/06/2021 at 14:37 #140129 | |
DaveBarraza
![]() 88 posts |
rfw in post 94520 said:I've just found a slightly unexpected feature as a result of locking involving T102, P3 & P4Where does one find the Point numbers? "P4" etc? not on the signal number plan. Log in to reply |
Chicago Loop - P4 Locked with movement over P3 when reversed 22/06/2021 at 15:08 #140130 | |
Dionysusnu
![]() 576 posts |
DaveBarraza in post 140129 said:rfw in post 94520 said:I've just found a slightly unexpected feature as a result of locking involving T102, P3 & P4Where does one find the Point numbers? "P4" etc? not on the signal number plan. Press F11, go to points tab, click the mouse-like icon, then click the point in the view. That will select the point in the list, revealing its name and allowing you to customise its settings. Log in to reply The following user said thank you: DaveBarraza |
Chicago Loop - P4 Locked with movement over P3 when reversed 22/06/2021 at 15:42 #140134 | |
DaveBarraza
![]() 88 posts |
Wow thanks I had no idea about that menu, and I'd been wanting to send a maintainer out to crank points for a while. I guess I need to subscribe to the maintenance-grams! thanks again! Log in to reply |
Chicago Loop - P4 Locked with movement over P3 when reversed 13/03/2022 at 00:00 #145687 | |
rfw
![]() 150 posts |
Looking at version info from the forum, wiki & the current data version of the sim, leads me to believe that this issue is still outstanding, but I have not tested this so it may have been addressed
The train now standing on platform 2, should be on the rails Log in to reply |