Page 1 of 1
| Problems with Stonehaven crossovers 03/04/2018 at 12:03 #107243 | |
grahamj42
130 posts |
I had a lot of trouble getting a train to reverse at Stonehaven (up line) in Mechanical signalling, and eventually realised this was due to two small problems : 1. Both crossovers are controllable from one end only, and for the north crossover it's the trailing end, so I hadn't tried clicking there and thought control was automatic, as with some yards. 2. Attempting to give a hand signal with the green roundel gives a No train present message instead of a Route not available, so there is no hint to set the route. Almost all the other non-track-circuited points in the sim. are controllable from both ends (including the sidings at Stonehaven), so 1 seems a data imperfection, whereas 2 is more like 'unhelpful' coding. Hoping this might help someone... Log in to reply |
| Problems with Stonehaven crossovers 03/04/2018 at 13:58 #107245 | |
Peter Bennet
5402 posts |
Can you confirm sim version number and the options you used at launch. Peter I identify as half man half biscuit - crumbs! Log in to reply |
| Problems with Stonehaven crossovers 03/04/2018 at 14:23 #107246 | |
|
grahamj42
130 posts |
Peter, Sim version 4.2 build 2 Loader version 4.6.11 (rolled back from 4.6.12 after too many hanging problems) Options : Bells Off / Mechanical On / Track Off / TORR Off Sorry I forgot this in the original post. Graham Log in to reply |
| Problems with Stonehaven crossovers 03/04/2018 at 20:58 #107265 | |
|
Peter Bennet
5402 posts |
It works as expected though I can see there's an inconsistency in not having both ends of the cross-over visible but they are linked, so when one moves so does the other. Peter I identify as half man half biscuit - crumbs! Log in to reply |