Page 3 of 4
Port Talbot FAQ 02/07/2019 at 21:31 #119219 | |
headshot119
![]() 4869 posts |
1) I think the blank TD issue has already been fixed from a previous mantis report 2) I'd need to see the exact sequence of events, but I suspect there's a condition where you can get lucky and not manage to crash the trains into each other on the single line. Not sure if you saw my other post in the Stormy Up Loop thread? "I'll release an update along side the updated ground hog timetables (After the seed group feature hits the loader)" "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
Port Talbot FAQ 02/07/2019 at 22:11 #119224 | |
9pN1SEAp
![]() 1140 posts ![]() |
Thanks Karl, I didn’t see any report on the whitespace message but I had noticed the Pyle “Landore” post after my original message! Sadly I didn’t do a save on the Burrows but IIRC, I got a slot into sidings, routed to loop, then accepted an exit train, routed my inbound to BS, with outbound appearing towards 451 before the inbound got onto the single. If 451 isn’t a shunt it could well get a Mexican! Jamie S (JAMS) Last edited: 02/07/2019 at 22:13 by 9pN1SEAp Reason: None given Log in to reply |
Port Talbot FAQ 04/07/2019 at 10:57 #119256 | |
9pN1SEAp
![]() 1140 posts ![]() |
Another odd thing... as 2G50 stepped out past 3464 (Wildmill e/b starter distant), a note I had left at 3461 (Bridgend P3 starter) vanished from the berth. The branch was signalled onto P2 at the time. Thanks Jamie Jamie S (JAMS) Log in to reply |
Port Talbot FAQ 04/07/2019 at 11:02 #119258 | |
headshot119
![]() 4869 posts |
That's a really good spot, the issue was the berth clearing out when platform 1A became empty.
"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply The following user said thank you: 9pN1SEAp |
Port Talbot FAQ 04/07/2019 at 16:37 #119263 | |
9pN1SEAp
![]() 1140 posts ![]() |
Always a possibility I went completely mad, but when 2Q08 from CDF had changed ends at Bridgend P1 and was signalled to CR1, the berth changed to 2W08 just before stepping out to the VoG line!
Jamie S (JAMS) Log in to reply |
Port Talbot FAQ 08/07/2019 at 09:23 #119314 | |
geswedey
![]() 199 posts |
Ar88 in post 113886 said:Not found a bug, but I've got a TT request if possible? Still unable to route to Garw from Tondu. Also a through train from the OVE to Maesteg reverses at Tondu to the limit of shunt Glyn Glyn Calvert ACIRO Log in to reply |
Port Talbot FAQ 08/07/2019 at 10:16 #119316 | |
headshot119
![]() 4869 posts |
Unable to route? or unable to timetable?
"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
Port Talbot FAQ 08/07/2019 at 10:36 #119317 | |
geswedey
![]() 199 posts |
Apologies unable to timetable Glyn Glyn Calvert ACIRO Log in to reply |
Port Talbot FAQ 08/07/2019 at 11:31 #119320 | |
headshot119
![]() 4869 posts |
Thanks Glyn, I'll get that sorted for the next update.
"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
Port Talbot FAQ 08/07/2019 at 17:04 #119329 | |
geswedey
![]() 199 posts |
headshot119 in post 119320 said:Thanks Glyn, I'll get that sorted for the next update.Also trains don't always seem to want to pick up the token at Margam Abbey Works East for the OVE line to Tondu. Automatic reversals (non timetabled) also occur at Tondu on the OVE line if a stop is programmed for a train to run to run between the OVE and Maesteg in both directions but don't if its a passing time. Glyn Calvert ACIRO Log in to reply |
Port Talbot FAQ 08/07/2019 at 17:09 #119330 | |
headshot119
![]() 4869 posts |
geswedey in post 119329 said:headshot119 in post 119320 said:When are trains not wanting to pick up the token?Thanks Glyn, I'll get that sorted for the next update.Also trains don't always seem to want to pick up the token at Margam Abbey Works East for the OVE line to Tondu. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
Port Talbot FAQ 08/07/2019 at 17:27 #119331 | |
geswedey
![]() 199 posts |
headshot119 in post 119330 said:geswedey in post 119329 said:After arrival at Sig 3482 or at Sig 3348 the timetables have the correct route code of OVEheadshot119 in post 119320 said:When are trains not wanting to pick up the token?Thanks Glyn, I'll get that sorted for the next update.Also trains don't always seem to want to pick up the token at Margam Abbey Works East for the OVE line to Tondu. Glyn Calvert ACIRO Log in to reply |
Port Talbot FAQ 10/07/2019 at 20:18 #119362 | |
9pN1SEAp
![]() 1140 posts ![]() |
One more: The layout shows Llandeilo Junction but the interlocking view calls it "Llandilo"? Thanks Jamie Jamie S (JAMS) Log in to reply |
Port Talbot FAQ 14/07/2019 at 13:16 #119409 | |
9pN1SEAp
![]() 1140 posts ![]() |
And another: I keep asking the Landore shunter to call back in 2 minutes as I can't slot 5L32 (for the washer) out of the emergency road, but they keep calling back at alternating 20 second and 50 second intervals. A similar thing happened previously with the Margam East PIC. Thanks Jamie Post has attachments. Log in to view them. Jamie S (JAMS) Log in to reply |
Port Talbot FAQ 14/07/2019 at 14:13 #119411 | |
headshot119
![]() 4869 posts |
9pN1SEAp in post 119409 said:And another: I keep asking the Landore shunter to call back in 2 minutes as I can't slot 5L32 (for the washer) out of the emergency road, but they keep calling back at alternating 20 second and 50 second intervals. A similar thing happened previously with the Margam East PIC.That's a core code issue I believe, though I can't find the ticket number at the moment. Edit 23863 "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Last edited: 14/07/2019 at 14:14 by headshot119 Reason: None given Log in to reply The following user said thank you: 9pN1SEAp |
Port Talbot FAQ 14/07/2019 at 15:39 #119413 | |
9pN1SEAp
![]() 1140 posts ![]() |
Thanks Karl, I've just had (very late) 2Q08 and (early) 6O71 dispatched from Onllwyn onto the same single line. Naughty PIC! Post has attachments. Log in to view them. Jamie S (JAMS) Log in to reply |
Port Talbot FAQ 26/04/2020 at 20:49 #126338 | |
9pN1SEAp
![]() 1140 posts ![]() |
9pN1SEAp in post 119362 said:One more: The layout shows Llandeilo Junction but the interlocking view calls it "Llandilo"?It also says "Llandilo" in the Incident Log view when issues occur/resolve. Jamie S (JAMS) Log in to reply |
Port Talbot FAQ 26/04/2020 at 21:12 #126339 | |
9pN1SEAp
![]() 1140 posts ![]() |
I withdraw this post, there's a note about this in the documentation!
Post has attachments. Log in to view them. Jamie S (JAMS) Last edited: 26/04/2020 at 22:01 by 9pN1SEAp Reason: Jimmy Log in to reply |
Port Talbot FAQ 26/04/2020 at 21:20 #126340 | |
headshot119
![]() 4869 posts |
I opened the save, whoever has set the route has used the grey exit triangle in the bay. For a permissive move you need to set to the red exit triangle. EDIT - I respect the members decision to withdraw the question posed to the house. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Last edited: 26/04/2020 at 21:20 by headshot119 Reason: None given Log in to reply |
Port Talbot FAQ 14/06/2020 at 00:06 #127552 | |
9pN1SEAp
![]() 1140 posts ![]() |
I have 0B33 on the Swansea Avoiding heading towards Landore, but can't route 263 to 285 "point(s) locked reverse". I suspect this is related to the route for 5L08 which recently emerged from the Emergency Road to reverse towards Maliphant, as I have seen 903 points locking normal on main route from 283. Weird! Thanks Jamie Post has attachments. Log in to view them. Jamie S (JAMS) Log in to reply |
Port Talbot FAQ 14/06/2020 at 15:16 #127564 | |
headshot119
![]() 4869 posts |
I will make investigatory noises.
"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply The following user said thank you: 9pN1SEAp |
Port Talbot FAQ 22/06/2020 at 16:25 #127793 | |
Troy100
![]() 19 posts |
On the sim you can set a route from PT245 to PT449 so a train can be signalled from the UM in to the DPL platform at Llanelli. In real life this route doesn't exist. If an UM train terminates at Llanelli and is to return west then it would normally be an ECS shunt move - usually signalled from UPL PT249 to PT251, then reverse from GPL PT554 to PT286 in to Llanelli DPL. Post has attachments. Log in to view them. Log in to reply |
Port Talbot FAQ 16/12/2020 at 16:12 #134777 | |
Troy100
![]() 19 posts |
Hello, I can't remember if I've had this issue on previous version(s) of the sim or the loader but I can't set a route from Llandeilo Jn Up Loop to Up Main. 947 points are locked, "points locked normal by another route". I can't swing them manually either. Screenshot attached. Cheers Post has attachments. Log in to view them. Log in to reply |
Port Talbot FAQ 16/12/2020 at 16:23 #134778 | |
postal
![]() 5216 posts |
Troy100 in post 134777 said:Hello,If you can post a saved game rather than a screenshot it makes it much easier for people to diagnose. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
Port Talbot FAQ 16/12/2020 at 16:39 #134779 | |
9pN1SEAp
![]() 1140 posts ![]() |
Hi all, The aforementioned points P947 appear to be permanently locked normal even when starting with no timetable. I've tried swinging every other set of points on Panel C including all the frames, but nothing seems to unlock these. Incidentally, I note that P952A (Llandeilo Down Loop Down Derailer) reversing, locks P953A/B (Main line crossover West End) normal, for no discernible reason! Also, there's a catch point shown between Swanesa Loop West Jn and Cockett Tunnel on the down which isn't assigned a point ID in F11, isn't swingable and doesn't redraw. Does it exist clipped & scotched in real life? Thanks Jamie Jamie S (JAMS) Log in to reply The following user said thank you: Troy100 |