1. Home
  2. Library
  3. Data

Upcoming Games

(UTC times)

Full list
Add a game

Upcoming Events

No events to display

Who's Online

Port Talbot FAQ

You are here: Home > Forum > Simulations > Released > Port Talbot > Port Talbot FAQ

Page 4 of 4

Port Talbot FAQ 16/12/2020 at 17:29 #134781
Stephen Fulcher
Avatar
2080 posts
Online 		947 points appears to be a bug - logged on mantis for investigation #32527.

The interaction between 952 and 953 points is correct and is commonplace amongst Western Region panels.
Log in to reply
Port Talbot FAQ 16/12/2020 at 17:39 #134782
Steamer
Avatar
3984 posts 		9pN1SEAp in post 134779 said:

Also, there's a catch point shown between Swanesa Loop West Jn and Cockett Tunnel on the down which isn't assigned a point ID in F11, isn't swingable and doesn't redraw. Does it exist clipped & scotched in real life?
That'll almost certainly be a sprung catch point, to derail anything going backwards down the hill. Unfitted or partially fitted freights were still common when the panel was commissioned in the 60s.
"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q)
Log in to reply
The following user said thank you: 9pN1SEAp
Port Talbot FAQ 16/12/2020 at 19:17 #134785
9pN1SEAp
Avatar
1180 posts
Online 		Thanks! Every day's a school day.
Jamie S (JAMS)
Log in to reply
Port Talbot FAQ 21/12/2020 at 14:10 #135019
9pN1SEAp
Avatar
1180 posts
Online 		Just had a TCF on section TDG, after 293 on the Up Main at Neath. Reported as LANDORE area :)

Thanks
Jamie
Jamie S (JAMS)
Last edited: 21/12/2020 at 14:12 by 9pN1SEAp
Reason: None given
Log in to reply
Port Talbot FAQ 21/12/2020 at 16:46 #135025
Stephen Fulcher
Avatar
2080 posts
Online 		Confirmed. Mantis 32554 on Mantis.
Log in to reply
The following user said thank you: 9pN1SEAp
Port Talbot FAQ 29/05/2021 at 14:27 #139779
KymriskaDraken
Avatar
963 posts 		There are two "permission" phone calls missing from the manual - Burrows Sdg and Port Talbot Up Sdg.

Kev
Log in to reply
Port Talbot FAQ 29/05/2021 at 16:59 #139781
y10g9
Avatar
895 posts 		Port Talbot Up Sidings was already in the manual
Quote:
Trains entering at Port Talbot Up Sidings will phone for permission to enter. In order to set a route from 7537 signal into the Up Sidings you must phone the person in charge, and request they press the shunter release control.
Port Talbot Crossing was taken out of use on XX/XX/XXXX a startup option is available to disable the crossing. When the crossing is enabled it should be noted that 3060 requires the barriers down, and that the auto raise is disabled by setting a route from 7544.
A note has been added about Burrows Siding
Log in to reply
Port Talbot FAQ 30/05/2021 at 12:14 #139787
Newhampshires
Avatar
101 posts 		Hmmm this is good to know Port Talbot Up Sdgs....
Log in to reply
Back