Page 1 of 1
| Hosting simulation to a local area network(ad hoc) 18/12/2018 at 14:24 #114140 | |
thamibn
7 posts |
Hi everyone, How can I host SimSig for my friends to connect and we play all of us on different laptops using the adhoc or local area network that I can setup on windows 10 and they can connect using wifi, we currently at remote area so we cannot use the internet to host the sim, thanks Log in to reply |
| Hosting simulation to a local area network(ad hoc) 18/12/2018 at 14:27 #114142 | |
headshot119
4869 posts |
Assuming all the laptops are on the same local network, all you did is start one game up as a server, and then connect using that laptops local IP Address.
"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply The following user said thank you: thamibn |
| Hosting simulation to a local area network(ad hoc) 18/12/2018 at 16:26 #114147 | |
|
thamibn
7 posts |
We will try that, hope it works
Log in to reply |
| Hosting simulation to a local area network(ad hoc) 18/12/2018 at 19:22 #114151 | |
|
thamibn
7 posts |
It doesn't not connect it says server disconnect on the client side and on my side it doesn't show up anything. I created a wlan hostednrtwork and my friend is connectect to it via wifi. Last edited: 18/12/2018 at 19:23 by thamibn Reason: None given Log in to reply |
| Hosting simulation to a local area network(ad hoc) 20/12/2018 at 12:32 #114185 | |
|
Albert
1315 posts |
Did you create that network using your computer's own wifi adapter as a hotspot? In that case you will have a different IP address on that interface, which you'd need to check in the adapter settings in Network Settings, I believe. It is at least not the same IP address as you'd have on your wired interface, which SimSig is probably reporting. You could run "ipconfig /all" in CMD to find out - if unsure about the different IP addresses, you could post the output here (just remove the MAC addresses, which can be personally identifiable information). It could also be a firewall setting, by the way. Are you running any firewall application beside Windows firewall? AJP in games Last edited: 20/12/2018 at 14:07 by Albert Reason: None given Log in to reply The following user said thank you: thamibn |
| Hosting simulation to a local area network(ad hoc) 20/12/2018 at 19:28 #114187 | |
|
thamibn
7 posts |
I will post the images as per your request, thanks
Log in to reply |
| Hosting simulation to a local area network(ad hoc) 22/12/2018 at 10:27 #114211 | |
ajax103
1120 posts |
headshot119 in post 114142 said:Assuming all the laptops are on the same local network, all you did is start one game up as a server, and then connect using that laptops local IP Address.I have one question about that, when I start up SimSig and get to the final option of hosting a MP session, I have two IP addresses: 1. xxx.xxx.xxx.xxx (do not use when hosting on the Internet) 2. xxx.xxx.xxx.xxx is what I get when I click on the What is My Internet Address So when I do manage to get to setting up a MP session on a local network, what IP address do I give someone to connect to me via wifi? Also if I hosted a MP session on the internet, what IP address do I use? I just want to be sure on how to set it up as I'm moving and want to be sure I know how to set up a MP session both online and over the Internet. Also what is a Internet Gateway? Last edited: 22/12/2018 at 10:38 by ajax103 Reason: None given Log in to reply |
| Hosting simulation to a local area network(ad hoc) 22/12/2018 at 10:41 #114212 | |
Steamer
3984 posts |
ajax103 in post 114211 said:The first address is your computer's local address on the local network. Computers on the same local network can use this address to connect to you. The second address is your public address (i.e. the address your network presents to the rest of the world). Computers not on your network use this address to connect to you. You must also set up port forwarding on your router so that traffic arriving at your router from the rest of the internet on a given port (50505 is the SimSig default) is directed to your computer. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply The following user said thank you: ajax103 |
| Hosting simulation to a local area network(ad hoc) 22/12/2018 at 11:54 #114213 | |
|
ajax103
1120 posts |
Thank you so the only difficult thing to look at is the port forwarding then (depending on level skill) Still least it means I now understand what the two IP addresses are. Howwever what is a Internet Gateway? In simple terms please 
Log in to reply |
| Hosting simulation to a local area network(ad hoc) 22/12/2018 at 12:12 #114214 | |
Dick
387 posts |
It is the local IP address of your router which your device needs to connect to in order to access the internet.
Log in to reply |
| Hosting simulation to a local area network(ad hoc) 22/12/2018 at 18:47 #114215 | |
|
ajax103
1120 posts |
Dick in post 114214 said:It is the local IP address of your router which your device needs to connect to in order to access the internet.Sorry I misread the SimSig Loader, it actually said Interface Gateway so what is the difference between "Run a SimSig Server" and "Run a Interface Gateway"??? Log in to reply |
| Hosting simulation to a local area network(ad hoc) 22/12/2018 at 18:49 #114216 | |
pedroathome
915 posts |
ajax103 in post 114215 said:Dick in post 114214 said:The interface gateway sends data out in a similar way of the Network Rail Open Data Feeds. Not something that most poeple would make use of. If you want to run the session as a multiplayer, it would always be run it as a server.It is the local IP address of your router which your device needs to connect to in order to access the internet.Sorry I misread the SimSig Loader, it actually said Interface Gateway so what is the difference between "Run a SimSig Server" and "Run a Interface Gateway"??? ====Edit==== This is something which I have done previusally with the interface gateway, where the TDs from the sim are displayed on an external application. Something similar to that of Traksy and Open Train Times do with the real NR feeds. James Last edited: 22/12/2018 at 19:04 by pedroathome Reason: None given Log in to reply |
| Hosting simulation to a local area network(ad hoc) 22/12/2018 at 19:44 #114217 | |
postal
5263 posts |
ajax103 in post 114211 said:I have one question about that, when I start up SimSig and get to the final option of hosting a MP session, I have two IP addresses:This page of the Wiki may explain a bit more about internal and external IPs for you. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |