Page 2 of 4
Derby FAQ 22/04/2023 at 11:10 #151377 | |
Sidestick Priority
![]() 39 posts |
Upon starting a new game in the modern era, the sim has given me a TSR at Willington(UM) of 545 mph. Typo, or HS2 phase 3 prep?... Thanks for the update of a great sim! ![]() Post has attachments. Log in to view them. Log in to reply |
Derby FAQ 22/04/2023 at 13:25 #151379 | |
Stephen Fulcher
![]() 2055 posts |
Sidestick Priority in post 151377 said:Upon starting a new game in the modern era, the sim has given me a TSR at Willington(UM) of 545 mph. Typo, or HS2 phase 3 prep?...Mantis 38514 Log in to reply |
Derby FAQ 22/04/2023 at 18:28 #151387 | |
ajax103
![]() 1113 posts |
Hap in post 151345 said:Swadlincote in the UP: s I don't suppose the manual could be updated to add the above information on how to set the various routes that the GF's in the simulation require as well as explain how to set routes towards Drakelow PS for Nadins Siding please? The only reference in the forum state "Not the Swadlincote GFs? One for Sdg and then U/D for the mains +over" which isn't helpful. Log in to reply |
Derby FAQ 22/04/2023 at 19:47 #151388 | |
Steamer
![]() 3958 posts |
I'll add a little more detail, however the operation of ground frames in general is described here: https://www.SimSig.co.uk/Wiki/Show?page=usertrack%3Assrun%3Alever_frames The exact operation of each frame is generally left as an exercise for the reader, as it would be impractical to write out a step-by-step guide for every move at every frame. EDIT: manual now updated with a general note in the 'features' section and some more detail on some locations "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Last edited: 22/04/2023 at 20:21 by Steamer Reason: None given Log in to reply The following user said thank you: jc92 |
Derby FAQ 23/04/2023 at 14:09 #151414 | |
9pN1SEAp
![]() 1140 posts |
Still getting issues with penalties for wrong platforms. If you ring Derby Supervisor to change to a numbered platform, e.g. 1, 2, 4, 6 then the train will stop at the near end (e.g. 1A Down or 6B Up) and you get a "wrong platform" penalty. However, even if you specify the near end, as in the attached with 1F42 stopped in 2A as advised, I still got a "wrong platform" penalty! Thanks Jamie Post has attachments. Log in to view them. Jamie S (JAMS) Log in to reply |
Derby FAQ 23/04/2023 at 14:19 #151415 | |
headshot119
![]() 4869 posts |
Just to confirm you mean in the performance analysis it's noted an incorrect or opposite platform even though you've made the call ahead of time?
"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
Derby FAQ 23/04/2023 at 14:33 #151416 | |
9pN1SEAp
![]() 1140 posts |
Hi Karl, Yes, it's showing up both in F2 as "Platform alteration" (despite booked) and the penalties are clocking up in F5. Just got another one for the bay platform 5 as well! ![]() Post has attachments. Log in to view them. Jamie S (JAMS) Log in to reply |
Derby FAQ 24/04/2023 at 20:12 #151446 | |
43084
![]() 7 posts |
I'm not sure if this is strictly a Derby bug or me just breaking Simsig in general. I was playing Derby and had a points failure meaning no access from 425/427 towards Spondon so I was reversing everything into Chaddesden and through the station proper. By the time it got to 3P08 and 0T12, I had trains everywhere and very little space. I think I even had a second points failure by that time meaning no trains could leave P5/6. To get 0T12 to move around the trapped 1M65, I had to make it 'manually reverse' to Chaddesden (because for some reason, the original shunt via 473 vanished and it 'started' from the second part) and then manually reversed it into P4 where 3P08 was waiting, but it just sat there saying "3P08 is in front of me" even though it was meant to couple to it. The F2 box showed it thinking it was still in P6. In the end, I removed the train but I've replicated it and it happened again. Save attached. Post has attachments. Log in to view them. Last edited: 24/04/2023 at 20:13 by 43084 Reason: None given Log in to reply |
Derby FAQ 24/04/2023 at 20:23 #151448 | |
ajax103
![]() 1113 posts |
43084 in post 151446 said:I'm not sure if this is strictly a Derby bug or me just breaking Simsig in general.It's a bug, I've encountered it too many times to count on the 1987 TT where you have plenty of loco changes, is certainly annoying as it takes a liberal use of having to tell the trains to shunt forward and hope they join before they finally join so yes it's def a sim bug where joins don't always work as timetabled. Log in to reply |
Derby FAQ 24/04/2023 at 20:30 #151449 | |
Stephen Fulcher
![]() 2055 posts |
It appears you reversed 0T12 somewhere other than the booked Derby (424) as it is still looking for that location, not Derby station.
Log in to reply |
Derby FAQ 25/04/2023 at 03:57 #151457 | |
Dionysusnu
![]() 576 posts |
In your saved game, 0T12 is still wanting to go to signal 424 first. That's where it was meant to shunt via, so it refuses to couple up before it's done that. Also, if you sent 0T12 via Chaddesden, that would mean it's on the wrong side of 3P08. In this case, it looks like that would end up fine, but that would not always be the case, for realism purposes. Log in to reply |
Derby FAQ 25/04/2023 at 07:40 #151459 | |
postal
![]() 5216 posts |
To move things forward without deleting any trains, go to the F2 screen, right click on 0T12, select "timetable options" then the "edit timetable" option, click on the Derby DGL entry and then click on the "Current/Next location" button. This resets the internal workings of SimSig with the timetable side of the house now believing that the train is at the correct location to make the join. Ran your saved game, edited the TT and the join started immediately.
“In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Last edited: 25/04/2023 at 07:44 by postal Reason: None given Log in to reply |
Derby FAQ 25/04/2023 at 16:32 #151469 | |
Troy100
![]() 19 posts |
The sim won't let me apply a reminder appliance on the emergency replacement buttons for signal 294 and EN10 (DN/UP Stoke, protecting signals for Egginton AHB). I can apply a RA fine on other emergency replacement buttons. Thanks Log in to reply |
Derby FAQ 25/04/2023 at 17:31 #151473 | |
headshot119
![]() 4869 posts |
Ah yes, it's an artifact of how the "special" emergency replacement switches have been implemented which allows the area to expand and contract when chained to Staffordshire. I'll log a Mantis ticket shortly to see if we can improve things. Edit Mantis 38537 "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Last edited: 25/04/2023 at 18:25 by headshot119 Reason: None given Log in to reply |
Derby FAQ 26/04/2023 at 08:42 #151482 | |
MrSuttonmann
![]() 265 posts |
![]() At Mantle Lane, the Down Goods Loop signal ML2 cannot be interposed against, however the TD has stepped up to the signal. I was just wondering which is correct - I would expect to be able to interpose against a signal if the TD steps to it. (Formerly known as manadude2) Last edited: 26/04/2023 at 08:42 by MrSuttonmann Reason: None given Log in to reply |
Derby FAQ 26/04/2023 at 08:58 #151483 | |
JamesN
![]() 1591 posts ![]() |
MrSuttonmann in post 151482 said:Mantis 38542 Log in to reply |
Derby FAQ 26/04/2023 at 09:34 #151484 | |
MrSuttonmann
![]() 265 posts |
JamesN in post 151483 said:MrSuttonmann in post 151482 said:Thanks James - in fact, this might seem to the the case with all of the shunt signals (except ML11, ML31 & ML223) in the Mantle Lane area.Mantis 38542 (Formerly known as manadude2) Log in to reply |
Derby FAQ 26/04/2023 at 15:38 #151502 | |
ajax103
![]() 1113 posts |
Just checking but at Branston when you have a train at signal 95 which is routed via Birmingham Curve towards Drakelow, is it meant to display a shunt aspect? It might just be a senior moment but I would have thought the driver would get a normal signal aspect there? Log in to reply |
Derby FAQ 26/04/2023 at 15:58 #151505 | |
AndyG
![]() 1842 posts |
Can't show a main aspect as route is onto non-TCed line, has to be proceed on line of sight.
I can only help one person a day. Today's not your day. Tomorrow doesn't look too good either. Log in to reply The following user said thank you: ajax103 |
Derby FAQ 27/04/2023 at 18:26 #151551 | |
9pN1SEAp
![]() 1140 posts |
Hi, I have had a call from Trent PSB asking if they can send me a passenger train 1/2 E. Seems something of a misuse of the phone system! Thanks Jamie ![]() Post has attachments. Log in to view them. Jamie S (JAMS) Log in to reply |
Derby FAQ 28/04/2023 at 09:01 #151561 | |
Jan
![]() 892 posts |
Wrote up a feature request for that (Mantis 38554), although the thing is that while a call for a train running half a minute early is certainly a bit extreme, in other cases two or three minutes of earliness can already be enough to suddenly have trains running in the wrong order. In real life the neighbouring box would certainly take that into account when deciding whether to call or not, but it might be not that easy to teach the neighbouring sim-signaller to behave in the same way.
Two million people attempt to use Birmingham's magnificent rail network every year, with just over a million of them managing to get further than Smethwick. Log in to reply |
Derby FAQ 28/04/2023 at 16:17 #151574 | |
Jan
![]() 892 posts |
Post-scriptum: It turns out that the cut-off for phone calls from the neighbouring box can already be adjusted, and the low value for Clay Cross was chosen precisely because of the "trains running out of their booked order" problem. So you'll probably have to live with that kind of phone system "misuse".
Two million people attempt to use Birmingham's magnificent rail network every year, with just over a million of them managing to get further than Smethwick. Log in to reply |
Derby FAQ 28/04/2023 at 17:49 #151577 | |
9pN1SEAp
![]() 1140 posts |
Thanks Jan, I wonder if the core code could intelligently decide if early trains wouldn’t generate a call if the early train would NOT appear before any other candidate trains? Cheers Jamie Jamie S (JAMS) Log in to reply |
Derby FAQ 28/04/2023 at 22:36 #151582 | |
Kage Acheron
![]() 11 posts |
Bug: once a train is signalled out of Spondon Accordis sidings, I am no longer able to raise the Spondon LC gates. In addition, I am no longer able to set a route from Courtaulds to Accordis, and get the message "Subroute locked in opposite direction". I suspect that this is due to the hidden signal SPDN01 (located before signal 408 but not shown on the panel) not automatically clearing, and therefore locking in a route that I am unable to clear. I have attached a save where this bug can be reproduced.
Post has attachments. Log in to view them. Last edited: 28/04/2023 at 22:37 by Kage Acheron Reason: None given Log in to reply |
Derby FAQ 28/04/2023 at 22:58 #151583 | |
headshot119
![]() 4869 posts |
Kage Acheron in post 151582 said:Bug: once a train is signalled out of Spondon Accordis sidings, I am no longer able to raise the Spondon LC gates. In addition, I am no longer able to set a route from Courtaulds to Accordis, and get the message "Subroute locked in opposite direction". I suspect that this is due to the hidden signal SPDN01 (located before signal 408 but not shown on the panel) not automatically clearing, and therefore locking in a route that I am unable to clear. I have attached a save where this bug can be reproduced.Mantis 38560 "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |