Page 1 of 2
SINFIN LEVER FRAME 30/03/2015 at 19:31 #70550 | |
John 23
![]() 173 posts |
Cannot get the No 2 frame to release. Is it on a timer delay from 6D07 arriving?
Log in to reply |
SINFIN LEVER FRAME 30/03/2015 at 20:13 #70552 | |
Muzer
![]() 718 posts |
I have the same issue. I believe the problem might be to do with 6D07's location not stepping correctly upon departure from the St. Andrew's sidings, but even changing the current/next location does not cause it to step up, so I don't really know what to do. http://tim32.org/~muzer/6d08.png http://tim32.org/~muzer/6d08_timetable.png
Last edited: 30/03/2015 at 20:15 by Muzer Log in to reply |
SINFIN LEVER FRAME 30/03/2015 at 20:56 #70553 | |
BarryM
![]() 2158 posts |
The station track needs to be occupied for at least 3 minutes before a release can be obtained. Barry Barry, Sydney, New South Wales, Australia Log in to reply The following user said thank you: John 23 |
SINFIN LEVER FRAME 31/03/2015 at 15:38 #70578 | |
John 23
![]() 173 posts |
Whilst thanking BarryM for his usual helpful reply, it would be a good idea if the Sim manual made mention of this!
Log in to reply |
SINFIN LEVER FRAME 31/03/2015 at 16:25 #70580 | |
Stephen Fulcher
![]() 2055 posts |
This has a ticket open John - number 12693.
Log in to reply The following users said thank you: BarryM, John 23 |
SINFIN LEVER FRAME 31/03/2015 at 17:24 #70581 | |
John 23
![]() 173 posts |
No go. Waited 3 minutes + and still no frame release.
Log in to reply |
SINFIN LEVER FRAME 31/03/2015 at 17:39 #70583 | |
John 23
![]() 173 posts |
I now find that 6D07 was waiting for No 3 frame, not No2......
Log in to reply |
SINFIN LEVER FRAME 01/04/2015 at 12:47 #70605 | |
Chrisrail
![]() 384 posts |
Just like the real thing. we regularly have to send the MOM up there when it breaks !!!!! ![]() Log in to reply |
SINFIN LEVER FRAME 01/04/2015 at 19:14 #70615 | |
8stewartt
![]() 33 posts |
can't beat a sim simulating life on the ground to perfection ![]() Log in to reply |
SINFIN LEVER FRAME 14/04/2015 at 22:14 #71096 | |
Steamer
![]() 3958 posts ![]() |
Please can someone explain how these frames are released? I'm attempting to add to the Wiki, but the only one I can get to release is No.3 when the branch is unoccupied.
"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
SINFIN LEVER FRAME 14/04/2015 at 23:10 #71099 | |
BarryM
![]() 2158 posts |
" said:Please can someone explain how these frames are released? I'm attempting to add to the Wiki, but the only one I can get to release is No.3 when the branch is unoccupied.Have you tried experimenting with the sim loaded without a timetable? Certain tracks need to be occupied for a certain time (3 minutes?) before a release is given. Barry Barry, Sydney, New South Wales, Australia Log in to reply |
SINFIN LEVER FRAME 15/04/2015 at 08:09 #71104 | |
Steamer
![]() 3958 posts ![]() |
" said:" said:I've sent a train down timed to stop at Sinfin No.2, next location Sinfin No.2 loop and have been unable to release the frame after 5 minutes.Please can someone explain how these frames are released? I'm attempting to add to the Wiki, but the only one I can get to release is No.3 when the branch is unoccupied.Have you tried experimenting with the sim loaded without a timetable? Certain tracks need to be occupied for a certain time (3 minutes?) before a release is given. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
SINFIN LEVER FRAME 18/05/2015 at 18:14 #72428 | |
Dick
![]() 387 posts ![]() |
Did anybody discover how to release Sinfin ground frames? Can't get GF3 to release whether branch occupied or unoccupied. :S
Log in to reply |
SINFIN LEVER FRAME 19/05/2015 at 17:40 #72488 | |
kreader
![]() 38 posts |
The operation of Sinfin Sidings is the only aspect of this sim that I have failed to master. The morning train which arrived in the morning failed to move into the sidings and the afternoon train, presumably the return working,failed to materialise as the lever frame once again failed to operate. I realise that I am not working it correctly but could someone please give a step by step explanation on how to operate it.
Log in to reply The following user said thank you: Coolah |
SINFIN LEVER FRAME 20/05/2015 at 08:28 #72512 | |
Hpotter
![]() 205 posts |
'm in the process of updating the simulation / wiki etc so should be all done very soon. (Work and life depending) :whistle: Log in to reply The following users said thank you: Coolah, Dick, CABOOSEMAN, Edwards, mirrlees |
SINFIN LEVER FRAME 08/06/2015 at 17:09 #73077 | |
dwelham313
![]() 139 posts |
I've managed to successfully get 6D08 into Sinfin so thought i'd detail how I did it for others to try. After 6D08 has run-round in St Andrews Sdg and been routed towards Sinfin, manually step its TT to show 'Sinfin GF no2' as its next location as the TT doesnt step properly. When the train arrives at GF no2 its direction should change to 'up'. After 3 minutes you can unlock GF no2 (click the green F). Operate the release (lever 1), then the facing point lock lever. Now operate the 'Sdg' lever and return the point lock to normal. You can now clear the 'up' signal and the train will move off into the siding and detatch the loco. Return the 'up' signal lever and clear the 'sdg' signal. The loco will re-appear on the track circuit section and head down to Sinfin. Operate GF no3 (click the green F) and operate the release lever, the points lever and the down signal lever and the loco will disappear into Sinfin Sdgs. You can now close both frames (remember you need to operate the point lock on GF no2 before moving the points back to normal) Hopefully that is clear enough for people to understand and to work the rest of the moves around Sinfin. Out of interest, why does the loco disappear into Sinfin Sdgs and then re-appear only to couple back up to the tanks it has just detached? Last edited: 08/06/2015 at 20:06 by dwelham313 Log in to reply |
SINFIN LEVER FRAME 19/11/2015 at 19:57 #77918 | |
Red For Danger
![]() 171 posts |
Thanks for the explanation above. I have managed to get 6D08 into the siding, the loco has uncoupled and returned back to Sinfin Central but it is still showing 'Down' as the direction of travel. I then operated GF 3 as directed and reversed the direction of the loco to the up direction but the driver called in saying that he / she was at signal 374X which was showing red. I gave him / her the authorisation to pass the signal at red and it trundled back into the siding, but despite all efforts it will not re-join the train that it has just left. Can somebody point me in the right direction as to what i am doing wrong.....? Also, when I have passed this point and successfully joined the loco back to the train, should I not wait for it to leave the siding before re-setting the lever frames back to normal......? Sorry for all this - I'm finding the whole Sinfin manouvres very confusing....! Perhaps an idiots guide with further explanation wold help those of us who are not so familiar with Derby. Thanks. Log in to reply |
SINFIN LEVER FRAME 20/11/2015 at 04:02 #77930 | |
BarryM
![]() 2158 posts |
" said:Thanks for the explanation above.To check joining, using the Train List (F2) you must ensure that both the joining trains are at the same location. If not, in F2, you need to adjust the trains timetable by right clicking the trains ID, click on "Timetable Options", click "Edit Timetable" then edit "Timetable Editor" using the Location List, highlight the trains location then click on "Set current/next location" button. Press "Ok". Barry Barry, Sydney, New South Wales, Australia Last edited: 20/11/2015 at 04:03 by BarryM Log in to reply |
SINFIN LEVER FRAME 20/11/2015 at 20:50 #77971 | |
Steamer
![]() 3958 posts ![]() |
I've just played around with the Derby update released today, and the Sinfin frames seem to work a lot better. To avoid potential problems, I'd load a save made before the train entered the branch.
"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
SINFIN LEVER FRAME 05/01/2017 at 11:39 #91312 | |
Coolah
![]() 26 posts |
I couldn't agree more.
Log in to reply |
SINFIN LEVER FRAME 17/03/2017 at 15:20 #93690 | |
AlastairRonaldo
![]() 7 posts |
How does one get 0F96 to come out of Sinfin Sidings? It says points set incorrectly before me: but when I click on GF3 Full (F), it just keeps flashing. Any ideas, anybody? Last edited: 17/03/2017 at 15:21 by AlastairRonaldo Reason: Spelling mistake Log in to reply |
SINFIN LEVER FRAME 17/03/2017 at 17:40 #93693 | |
Steamer
![]() 3958 posts ![]() |
Clicking on the F (Free) button releases the frame, then click Show-> Lever Frames-> Sinfin No.3 and operate the levers as appropriate (Lever 1 first to release the rest of the levers, then set the points and signal. Don't forget to move them back and lock the frame once the train has left the sidings).
"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply The following user said thank you: AlastairRonaldo |
SINFIN LEVER FRAME 17/03/2017 at 20:33 #93695 | |
AlastairRonaldo
![]() 7 posts |
Thanks very much, Steamer! I live in Derby, you see!
Log in to reply |
SINFIN LEVER FRAME 10/04/2020 at 17:18 #125553 | |
Chromatix
![]() 190 posts |
Following the advice in this thread, I was able to get a train into and out of Sinfin successfully. This required stepping the timetable past Melbourne Jn on the way in. However, I can't see any information about Sinfin on the wiki. Surely it should be there by now, after 3 years? Log in to reply |
SINFIN LEVER FRAME 21/02/2022 at 20:33 #145297 | |
Guts
![]() 595 posts |
Chromatix in post 125553 said:Following the advice in this thread, I was able to get a train into and out of Sinfin successfully. This required stepping the timetable past Melbourne Jn on the way in.Still nothing on there. 5yrs now. LOL Log in to reply |